Locks camshaft in place when changing the cam belt on 1.4L | 1.6L petrol engines.

A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

A comprehensive kit for locking the camshaft / crank in their timed position. This allows for the servicing of the camshaft drive chain. Includes guide pins required for aligning the supercharger (on those engines to which it is fitted).

• Engine codes: CBZA | CBZB
• Applications: Audi A1 | VW Beetle, Caddy, Golf, Passat | Skoda Fabia, Rapid, Roomster, Yeti.

These two tools are required for setting the camshaft / tensioner on 1.4L | 1.6L petrol engines found in various VAG vehicles from 1999 - 2014.

This kit is suitable for use with replacement cam belt kits: Contitech CT957K1, Gates K025565XS, INA 530 0089 10.

This flywheel locking tool is suitable for the VAG 1.4L TSi chain driven petrol engine.

Specialised locking tool kit for 5th generation diesel Blue Motion engines. Set includes crankshaft locking tools for both styles of VAG sprockets.

• For Gen 5 common rail diesels (Blue Motion)
• Applications include 1.6L | 2.0L TDi engines fitted to Audi A3 | A4 | A5 | A6 | Q5, VW Golf | Passat | Tiguan
• OEM equiv: T20102 (3359) | T10050 |T10051 | T10052 | T10100 | T10255 | T10264 | T10265 | T40098

A specialised kit for removing the camshaft sprocket from the taper on the camshaft on Pumpe Duse / common rail diesels. Includes a counter hold tool for loosening / tightening the camshaft hub bolt.

• Engines: 1.9L | 2.0L TDI
• OEM Equiv: T10051 | T10052

This tool locks the camshaft in position on 1.2L FSi / TFSi petrol engines found across the VAG range from 2009 - 2017.

Do not use this item as a holding tool when loosening / tightening the camshaft sprocket!

• Engine codes: CBZA | CBZB
• OEM Equiv: T10414

Fuel injection pump gear retainer & counter holder for crankshaft toothed belt sprocket when installing crankshaft oil seal (belt pulley end).

This tool holds the sprocket when releasing the fastener, reducing potential damage to the camshaft.

• 10mm dia pins
• 380mm overall length

A 4 piece kit designed specifically for Volkswagen and Audi technicians tackling direct ignition engine repairs. This essential set ensures safe, efficient removal of stubborn ignition coils without risking damage to delicate components.

Primarily compatible with EA111 | EA888 series petrol engines (1.2L-3.2L) with direct injection, found in VAG vehicles from ~2000-2010. Also compatible with 1.2L / 1.4L TSI (e.g., CBZB, CAXA) in later models like Golf MK6 | Audi A1.

• Two square prong for final output stage
• Single sided square for coils with power stage
• Wide shallow square for coils with final output

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

An upgraded timing tool kit for VAG 1.2L | 1.4L | 1.6L TFSi / FSi engines.

• Applications: Audi A1, Skoda Fabia | Octavia | Roomster, VW Beetle | Golf | Jetta | Polo | Touran
• A DTI gauge (ET1101) is required, but not included in this kit, as most workshops will already have one.

This kit provides the essential camshaft | crankshaft tools for working on popular VAG vehicles with 1.4L FSI and 1.6L | 1.9L | 2.0 TDi PD engines fitted to MK5 - MK6 generation vehicles fitted with toothed timing belts.

This kit is suitable for use with cam belt kits including INA 531020110, Contitech CT1028K3, Gates K055569XS.

• OEM Equiv: 310-084 (T10008) | 310-085 (T10050) | T20102 | 310-1054 (T10115) | T10060 | T10100 | T10264 | T10265

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

• Engine: 1.6L | 1.8L FSI (03-08)