A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

Comprehensive kit for engine timing / timing belt renewal on Holden 1.6D / 1.7D (before 2001) & Isuzu 1.5 / 1.7 / 2.0 / 2.2 / 2.3 / 2.4 / 2.5 / 3.0 / 3.1 engines.

This kit is used to set the camshafts in the correct timed position on certain V6 | V8 VAG engines. The kit includes camshaft locking plates, crankshaft locking pins, front panel slides and a belt tensioner adjustment tool.

• Associated tool: ET1297

This locking strap suits VAG 2.4L | 2.8L | 2.7L Turbo 4 Cam 30V engines (99 - 05). Size: 685mm O/A x 6mm & 8mm pins each side x 54mm distance x 40mm hole dia. USE with ET1105-4, ET1657, ET1205B & ET1297.

• Engine codes: ACK | AGA | APR | BBG
• OEM Equiv: 3391

A specialised kit for removing the camshaft sprocket from the taper on the camshaft on Pumpe Duse / common rail diesels. Includes a counter hold tool for loosening / tightening the camshaft hub bolt.

• Engines: 1.9L | 2.0L TDI
• OEM Equiv: T10051 | T10052

Adjustable design allows it to work on any sprockets of suitable size. Maximum spoke width - odd numbers 27mm, even numbers 17mm. Forcing screw with 17mm hex head. Body width: 133mm.

• Suits 5 or 6 spoke camshaft pulleys
• OEM Equiv: T40001

For locking crankshaft at TDC position during timing belt / flywheel / drive plate replacement or removal of the crankshaft bolt.

• Size: M12 x 1.5mm
• OEM Equiv: T40026
• Engine code: ASN | BBJ

A specialised tool to remove the toothed belt drive sprocket on high pressure fuel pumps fitted to VAG 3.0L 6 Cyl 4V diesel engines.

• Applications: Audi A5 | A6 | A8 | Q7, VW Phaeton | Touareg
• OEM Equiv: T10320

Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.

• Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne

A specialised kit for engine timing / timing belt replacement on VAG 1.4 - 2.0D Pumpe Duse, and 1.4L | 1.6L | 2.0L CR diesels.

These tools are also suitable for similar engines fitted to Ford | Dodge | Chrysler vehicles.

• Use in conjunction with ET1657.

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

Valve timing kit for late model Audi FSI chain driven engines common to V6 | V8 | V10 engines.

• OEM Equiv: T40069 | T40070 | T40071

A specialised kit for Audi 3.0L petrol engines (from 2001 - 2010), when adjusting left & right camshafts (Quad cam configuration drives all four camshafts from the crankshafts). Use with ET1567.

• Engine codes: ASN | BBJ
• Applications: Audi A4 | A6

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

• Engine: 1.6L | 1.8L FSI (03-08)