Driveway Tyre Inflator

Head Repair Kit
SKU: 3103000-CHRK

SKU 3103000-CHRK
Barcode # 9321280336148
Brand Sonsbeek

Consumable


You may also like


Promo
Sonsbeek Driveway Tyre Inflator

Sonsbeek Driveway Tyre Inflator

Supply Pressure: Maximum 13.8 BAR, Minimum 6.9 BAR, Recommended clean filtered air

Body Construction: Die cast aluminium with steel operating lever and impact absorbing bumper

Pressure Range: 0-9.6 BAR (0-138lbf/in2) standard

Gauge: Linear with magnifying window

  • Inlet size: 1/4" BSP
  • Measurement range: 0 - 160 PSI


More from this category


Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 1/4" BSP female inlet
  • Clip On connector
  • Sealing type chuck

Sonsbeek Clip On Chuck Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 6mm hose tail
  • Clip on chuck
  • Sealing type

Hold On Chuck

Hold On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 1/4" BSP female connection
  • Brass construction