Jamec Style Adaptors

Jamec Style Adaptors

 

TECHNICAL

These couplings have 2 tab buttons for a more secure lock.

The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.

 Quality and performance.  

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

JAMEC 310/320

WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

APPLICATIONS

Compressed air and pneumatic applications, but where only LOW flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

 

Jamec Style Couplers

Jamec Style Couplers

 

TECHNICAL

These couplings have 2 tab buttons for a more secure lock.

The new 2008 release GENUINE SONSBEEK 320 Series Couplings have been designed for the Industrial market.

 Quality and performance.  

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

JAMEC 310/320

ADVANTAGES

Twin tabs for more secure lock. Steel Valve Purple colour identification code

WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

MAINTENANCE

Lubricate occasionally.

 Not recommended for Dry air applications Refer to the Air breathing section

Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose

 

APPLICATIONS

Compressed air and pneumatic applications, but where only LOW flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 320 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

 

BACK BODY        CASE HARDENED STEEL

VALVE BODY       CASE HARDENED STEEL

SLEEVE               CASE HARDENED STEEL

VALVE                           Steel

SPRING                      AISI 301

TABS                          AISI 420

SEALS                          Buna N

Jamec Style Starter Kit

Jamec Style Starter Kit

  • 3/8" BSP adaptor
  • 3/8" BSP coupler
  • 15 - 18mm OTK style clips (2x)

Jamec Style Starter Kit

Jamec Style Starter Kit

  • 1/2" BSP Adaptor
  • 1/2" BSP Coupler
  • 17 - 20mm OTK style clips (2x)

Large Bore Clip On Tyre Chuck

Large Bore Clip On Chuck

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Large bore head is designed for use with earthmoving vehicles.

  • 1/4" BSP female connector
  • Single straight large bore chuck
  • Non sealing type

Large Bore Clip On Tyre Chuck

Large Bore Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Large bore chucks are designed for use with earthmoving vehicles.

  • 1/4" BSP female connector
  • Single straight large bore chuck
  • Sealing type

Lever Ball Valves

Lever Ball Valves

Female

SKU: ZZ160SBV

Lever Ball Valves

Suitable for industrial, pneumatic and hydraulic installations.

Ideal for hot/cold water, different oils, compressed air and gas.

Thread: ISO228- DIN259- BS2779

Minimum and maximum working temperature:

  • Air: -15oC, 220oC
  • Water: 0oC, 150oC Without steam
  • Gas: -15oC, 60oC

AGA Lever Ball Valve

Lever Ball Valves

Female

SKU: ZZ160GBV

Lever Ball Valves

Suitable for industrial, pneumatic and hydraulic installations.

Ideal for hot/cold water, different oils, compressed air and gas.

Thread: BS21- DIN 2999- ISO 7/1 Rp parallel Female/Female

Minimum and maximum working temperature:

  • Air: -15oC,220oC
  • Water: 0oC, 150oC Without steam
  • Gas: -15oC, 60oC

Load Genie

Load Genie

A compressor operating in a "start - stop" mode runs more efficiently if pressure trapped in the compressor head and discharge line is released after each pump up cycle.

This Load Genie offers a convenient way to release this trapped pressure. The Load Genie is a combination check and unloader valve. Simply install in the compressor discharge line.

The Load Genie senses air flow when the compressor is running and closes an unloading orifice port. When airflow stops, the Load Genie opens the unloading orifice to release head pressure, and the built in check valve keeps receiver air from leaking back into the discharge line and compressor head.

  • 3/8" PT Female x 3/8" PT Male
  • Flow SCFM: 3 - 12

Male Swivel Tailpieces

Male Swivel Tailpieces

SKU: ZZ103TMS

Male Swivel Tailpieces

Male swivel tailpieces are constructed from quality brass. The tail swivels in the centre, and is ideal for use with hose reels.

3 Way Manifold

Manifold | 3 Way

3 way round manifold designed for running multiple outlets. Robust alloy construction. Hi flow design.

  • 3 way manifold
  • 1/4" BSP connections

MDR3 Pressure Switch

MDR3 Pressure Switch

Thermal, 3 pole overload relay for Condor MDR3 pressure switches.

Mini Ball Valves

Mini Ball Valves

Sonsbeek mini ball vales are available with either female connections, or female / male connections. These are high quality ball valves made in Italy, with a metal body / chrome plated finish. These valves are for use with air / water only.

  • Valve body: CW 617N UNI-EN 12164
  • Ball gaskets: PTFE - Teflon
  • Lever: Glass charged nylon
  • Chrome plated body
  • Working pressure: 0 - 220 PSI
  • Working temperature: 0 - 90 degrees C
  • Made in Italy

Mini Ball Valves

Mini Ball Valves

Sonsbeek mini ball vales are available with male / female connections or female only. These are high quality ball valves made in Italy, with a metal body / chrome plated finish. These valves are for use with air / water only.

Mini Inline Oiler

Mini Inline Oiler

A mini inline oiler designed to be attached close to the air tool. For use with air tools which have a 1/4" BSP inlet size.

This mini oiler provides consistent lubrication to extend tool life and maximize performance. Lightweight aluminium construction for leak free operation. Clear reservoir for easy monitoring of oil levels. Thumb screw filler cap.

  • Thread type: Male - Female
  • Thread size: 1/4" BSP
  • Max working pressure: 150 PSI
  • Material: Aluminium / polycarbonate

Nitto Style Adaptors

Nitto Style Adaptors

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential.

The new 2007 release GENUINE SONSBEEK 400 Series Couplings have been designed for the Industrial market.

Quality and performance.

Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated

INTERCHANGEABILITY

RECTUS 03 SERIES NITTO KOHKI HI CUPLA,

NITTO KOHKI 200 SERIES,

JAPANESE INTERCHANGE,

J.P H.V. ONE TOUCH SERIES,

CEJN 315 SERIES,

SONSBEEK 413

TDK and many others


WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR


APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 400 series SAFETY ADAPTOR to avoid hose whip and to reduce noise at disconnection.


Nitto Style Airline Kit

Nitto Style Airline Kit

Popular selection of Nitto Style couplers / adaptors, brass fittings & hose clamps. In quality, Australian made Fischer plastic case.

  • 1/4" BSP Female coupler (2x)
  • 1/4" BSP Male coupler (5x)
  • 3/8" Tail coupler (4x)
  • 1/4" BSP Male adaptor (15x)
  • 3/8" BSP Male adaptor (5x)
  • 1/4" BSP Female adaptor (5x)
  • 3/8" Tail adaptor (5x)
  • 1/4" x 1/4" BSP Hex nipple (5x)
  • 3/8" Tail x 1/4" BSP Male Tailpiece
  • 10 - 16mm Worm Drive clamps (20x)
  • Packaged in Australian made Fischer plastic case