The Endeavour ET5116 is a heavy-duty hydraulic cable crimper designed for professional use in automotive, marine, industrial, and electrical applications. Engineered to deliver powerful and precise crimping, up to 13 Ton crimping force. This tool is ideal for working with large cable lugs ranging from 16mm to 300mm . 11 interchangeable hex dies included.

• Dies: 16, 25, 35, 50, 70, 95, 120, 150,185, 240, 300mm

Comprehensive non insulated terminal and Anderson plug crimper kit for battery terminal applications.

• Non insulated terminals
• 50 Amp housing / contacts / dust cover / handles / clamps
• Ratcheting crimper (AWG 20-16 | 16-14 | 12-10 | 8
• Cable cutters (cuts up to 38mm2 soft wire)

• 14 locking socket clips
• Magnetic base
• 1/4" Sq Drv

• 14 locking socket clips
• Magnetic base
• 3/8" Sq Drv

A handy socket which is designed to be used on thread taps from M4 through M14. Versatile design also allows it to be used with reamers / screw extractors with square shanks from 5mm - 8mm across the flats.

• Stepped chuck collet design for use with a wide range of square shanks.
• Suits M4 - M14 square taps
• 3/8" Sq Drv

Easily remove / install suspension struts whilst leaving the hub on vehicle. Universal design for use on most passenger cards and light commercial vehicles.

• 5 - 14mm maximum spread (reduces risk of damage to hubs)
• 17mm hex drive (use with hand tools only)

A repair kit for the 190NRV90-08CM non return valve.

• Spring
• Viton pad
• Biconic valve

90 degree non return valves retain air inside the compressor tank. The air compressor pulls in air through the check valve to pressurise the tank. This air creates a backflow pressure against the valve, in turn closing the valve / holding pressure in the tank.

• Inlet: 3/4" copper
• Outlet: 1/2" NPT Male
• 1/8" Female thread / nut for 6mm OD hose

• Aluminium ring | Spring | Viton Pad | Ogive

• Aluminium ring | Spring | Viton Pad | Ogive