120M04-5

120M04-5

5 way straight manifold designed for running multiple outlets. Robust alloy construction. Hi flow design.

  • 5 way manifold
  • 1/4" BSP connections

90 Degree NRV

90 Degree NRV

Repair Kit

SKU: 190NRV90-08CMR

90 Degree NRV

A repair kit for the 190NRV90-08CM non return valve.

  • Spring
  • Viton pad
  • Biconic valve

Air Breathing HoseAir Breathing Hose

Air Breathing Hoses

  • 10mm ID
  • With Air Breathing fittings
  • Australian made

Air Breathing HoseAir Breathing HoseAir Breathing Hose

Air Breathing Hoses

Specialised air breathing hose for applications where the airline is connected to breathing masks, such as in panel beating.

Air breathing hose is also available fitted with air breathing fittings. Air breathing fittings are also available separately.

10mm ID Airline Hose10mm ID Airline Hose10mm ID Airline Hose12mm ID Airline Hose

Airline Hoses

  • Made in Australia
  • From high quality polyurethane
  • Available in lengths from 20m - 50m
  • 10mm ID
  • One touch Euro style coupler / adaptor

Angled Chuck Dial Tyre Gauge

Angled Chuck Dial Tyre Gauge

An ideal gauge for checking tyre pressure on passenger cars. Supplied in a protective case.

  • 5-60 PSI (20-400kPa)
  • Angled Chuck
  • Deflate control
  • High quality diaphragm type gauge

Anti Whip Safety Adaptors

Anti Whip Safety Adaptors

TECHNICAL

The New range of SONSBEEK SAFETY ADAPTORS designed for the Australian Market.

These safety adaptors are fitted with a venting check so that when a hose is disconnected from its supply point, the pressurised air contained in the hose bore itself does not eject in a violent manor.

This greatly reduces any hose whip and reduces the extreme noise at disconnection.

ADVANTAGES

Increased safety standards in the workplace.

INTERCHANGEABILITY

Available in all common coupling interchanges used through out Australia.

INTERCHANGEABILITY

Available in all common coupling interchanges used through out Australia.


IMPROVED ACCIDENT PREVENTION

This safety adaptor dramatically reduces the vicious hose whip experienced at the disconnection of a pressurised air hose.

IMPROVED INDUSTRIAL SAFETY

The extreme noise level experienced at disconnection is greatly reduced

WORKING TEMPERATURE

-20°C up to +60°C

WORKING PRESSURE

Safe working up to 250 PSI



APPLICATIONS

Compressed air hoses.

CAUTION

Always check your fittings are securely fastened before use.

NICKEL PLATED HARDENED STEEL CONSTRUCTION



NOTE

Purging times vary in relation to pressure and hose length


KEEP CLEAN

Braided Recoil Hoses

Braided Recoil Hoses

Sonsbeek Recoil Air Hose is braided to provide extra strength & flexibility in tough working conditions. Sonsbeek reinforced hose can tolerate higher working pressures and operates far better in hot ambient temperatures.

  • Fitted with 1/4" BSP male swivel fittings.
  • Made in Australia quality.

Cap

Cap

SKU: ZZ33PC

Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 1/4" BSP female inlet
  • Clip On connector
  • Sealing type chuck

Sonsbeek Clip On Chuck Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 6mm hose tail
  • Clip on chuck
  • Sealing type

Cold Start ValveCold Start ValveCold Start Valve

Cold Start Valves

SKU: ZZ190NA

Cold Start Valves

Cold start valves bleed air from the compressor head during the first few pump revolutions, thus reducing motor staring torque requirements. These valves are especially helpful on oil lubed pumps that may be subject to low temperatures and low starting voltages.

Euro Style Adaptors

Euro Style Adaptors

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential. 

 The new 2007 release GENUINE SONSBEEK 525 Series Couplings have been designed for the Industrial market.

 Quality and performance. 

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

CEJN 320, RECTUS 25 & 26

RYCO 500, JP EURO 59 series, RECTUS 26KE

 WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

 OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

 

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 525 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

Euro Style Couplers

Euro Style Couplers

One Touch

SKU: ZZ100525CO

Euro Style Couplers

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential. 

 GENUINE SONSBEEK 525 Series Couplings have been designed for the Industrial market.

 Quality and performance. 

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

CEJN 320, RECTUS 25 & 26

RYCO 500, JP EURO 59 series, RECTUS 26KE

ADVANTAGES

One Touch AUTOMATIC Operation means no need to pull back the sleeve to connect. This clever one touch design incorporates a valve design that offers high flow rates at more than 60CFM .

 WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

 OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

MAINTENANCE

Lubricate occasionally.

 Not recommended for Dry air applications Refer to the Air breathing section

 Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose

APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

 

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 525 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

BACK BODY     CASE HARDENED STEEL

VALVE BODY    CASE HARDENED STEEL

SLEEVE             CASE HARDENED STEEL

VALVE                           Brass

SPRING                       AISI 301

BALLS                         AISI 420

SEALS                          Buna N

Female Hex Sockets

Female Hex Sockets

SKU: ZZ26HS

Female Hex Sockets

Sonsbeek female hex sockets are precisely machined from long lasting brass. Available in a range of BSP thread sizes.

  • Female hex sockets
  • Made in Australia
  • Brass