Cold Start Valve
3/8" NPT | 1.5 Bar
SKU: 190NA06
Cold start valves bleed air from the compressor head during the first few pump revolutions, thus reducing motor staring torque requirements. These valves are especially helpful on oil lubed pumps that may be subject to low temperatures and low starting voltages.
| SKU | 190NA06 |
| Barcode # | 9321280345263 |
| Brand | Sonsbeek |
| Product weight | 0.0500kg |
| Shipping weight | 0.090000kg |
| Size | 3/8" NPT |
| Type | Cold Start Valve |
| Max Working Pressure | 1.5 Bar |
| Material | Brass |
12 Months
Others also bought
Turbo System Leak Detector
Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.
- Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
- Includes pressure gauge, shut off valve, and pressure release valve.
- Adaptor sizes: 105 - 130mm
Brake Lining Thickness Gaug
A specialised brake wear gauge for use on heavy vehicles to check the thickness of remaining brake pad material.
An offset design allows for the blades to be inserted between the brake disc and the brake pad backing plate so that the pad thickness can be measured without the pad needing to be removed from the vehicle.
- 9 blades marked in both metric & imperial units. Range: 6 - 22mm (0.2362" - 0.8661").
- Always consult manufacturer's recommended measurements for brake pad replacement; many duty manufacturers recommend pad replacement at around 5mm.
Oil Funnel Honda | Hyundai
Threaded collar suits Honda / Hyundai / Kia / MG / Nissan vehicles.
Transparent lower chamber. Funnel can be directly connected to oil filler neck
- Funnel thread: M33 x P3.5
- Please note that this funnel does not suit the Nissan Navara YS23DDTT engine
More from this category
Flexible Hose
Replacement flexible hose for compressors.
- 330mm long
- 1/2" BSP female fittings
