Specialty Bits / Sockets
Drive
Length
Points
Size
Socket Type
Style
Type
- 10 Point
- Hex
- Phillips
- Ribe
- Spline
- Torx
- Torx Plus Tamperproof
- Torx Plus EPL
- Power Bit
- Bit Socket
- 3 Point clear
Vehicle Make
Mortorq Bit
A specialised Mortorq bit. Common applications include the front seat bolt on late model Jeep Cherokee vehicles.
- #2 Mortorq bit
- 5/16" hex drive
Mortorq Bit Socket
A specialised Mortorq bit. This size is commonly used to remove / install the bolts that secure the bell housing to the transmission on Holden V8 Commodore 4L60 transmissions.
- #4 Mortorq bit
- 3/8" Sq Drv
Pentagon Socket
Specialised pentagon socket used to secure spare tyres on Toyota / Lexus vehicles from 2005.
- 23mm
- Pentagon socket
- 3/8" Sq Drv
Pentagon Socket |10mm | Female
A professional quality pentagon impact socket. This size is commonly used on Nissan brake and fuel pump fixings. Part of the Endeavour Tools range of specialised sockets.
- 10mm diameter
- Female pentagon socket
- 1/2" Sq Dr
Ribe (Female) Impact Socket Set
Specialised female ribe sockets in 1/2" Sq Drv for clutches, cylinder heads and balance shaft fixings. Commonly used on Nissan / Renault vehicles, and Toyota idler pulley belts.
Impact grade for use with air tools.
- M6 | M8 | M10 | M12 Female ribe sockets
- 1/2" Sq Drv
- Chrome Moly construction
Ribe Bit Socket | M7 | 200mm
A specialised Ribe bit socket for headlight alignment on Alfa / Fiat vehicles. Also suitable for other applications requiring an M7 Ribe bit.
- M7 Ribe bit socket
- 200mm overall length
- 3/8" Sq Drv
Ribe Impact Socket | M11
Specialised Ribe impact socket for removing flywheel fixing bolts on Nissan / Renault M9R 2.0L DCi engines.
- M11 Ribe
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly
Ribe Socket | M10 | 100mm
A specialised Ribe socket that is commonly used with Audi / VW cylinder head bolts.
- M10 Ribe bit socket
- 100mm overall length
- 1/2" Sq Drv
Ribe Socket | M10 | 140mm
A specialised ribe socket for removing cylinder head bolts on VAG vehicles (and Ford 1.0L EcoBoost engines), and other applications that require an M10 ribe socket.
- M10 Ribe bit socket
- 140mm overall length
- 1/2" Sq Drv
SEK 1/4" Hex Bit Holder
A handy chrome bit holder for use with 1/4" Sq Drv ratchets. This bit holder has a 1/4" Sq Drv and holds 1/4" hex insert bits.
- 1/4" Sq Drv
- Holds standard 1/4" hex insert bits
- Ball holds insert bits securely
Sensor Socket Set (6 Pce)
A specialised deep socket set for acccessing difficult to reach pipe connectors and wired sensor units (NOT Lambda). Ideal for loosening ABS, master cylinder, diesel injection pipes and wired sensors.
- Sizes: 10mm | 11mm | 12mm | 14mm | 17mm | 19mm.
- 3/8" Sq Drv
Socket Adaptor Set
A handy socket adaptor set, with rotating sleeve, and colour coded sizes. The socket adaptors are made from high quality Chrome Vanadium in 1/4" sq drv | 3/8" sq drv | 1/2" sq drv. Ideal for use with cordless drills.
- 1/4" hex drive
- Sizes: 1/4" Sq Drv | 3/8" Sq Drv | 1/2" Sq Drv
- 65mm long (1/2" Sq Drv = 72mm long)
- Chrome Vanadium steel
Spline (Sec) Bit Socket | M16S
Specialty socket which is slightly undersized to avoid damage when removing sump plugs / gear boxes on selected VAG vehicles.
- Type: Spline (Sec)
- Size: M16
- Length: 60mm
- Drive: 1/2" Sq Drv
Spline (Sec) Bit Socket | M18S
A specialised Spline (Sec) socket for working on rear hubs on VW Golf | Jetta and other Mark IV chassis vehicles.
- M18 Spline (Sec)
- 78mm overall length
- 1/2" Sq Drv
Spline (Sec) Socket | M18
This specialised spline security socket is required when working on rear hubs of VW Golf | Seat Leon vehicles.
- M18S Spline security
- 3/4" Sq Drv
Spline / Spline (Sec) Impac
Impact grade spline socket set covering popular sizes for VAG Group vehicles. Sockets are 1/2" Sq Drv by 78mm long.
- M12 (Rear hub nuts on Touran)
- M14 (Rear hub nuts on Transporter)
- M16S (Rear hub nuts on Sharan)
- M18S (Rear hub nuts on Golf)
Spline / Triple Square Bit Socket Set
A handy set of spline bit sockets of sizes commonly used on engine head bolts. The long shaft allows access to recessed bolts.
- Sizes: M6 | M8 | M10 | M12 | M14 | M16
- 140mm overall length
- 1/2" Sq Drv
Spline Bit Socket | M14 | 100mm
A specialised spline bit socket for use on ball joints on VW LT | Transporter | Touran, and rear caliper bolts on VW Passat and Audi A3. Part of the Endeavour Tools range of specialised bit sockets.
- M14 Spline bit socket
- 100mm overall length
- 1/2" Sq Drv
Spline Bit Socket | M7 | 55mm
A specialised spline bit socket for removing the bolts that connect the driveshaft to the gearbox, on VAG vehicles.
- M7 Spline bit socket
- 1/2" Sq Drv
- 55mm overall length
Spline Bit Socket Set
A set of spline sockets from M4 - M16 in three different drive sizes. Spline sockets have many common automotive / industrial applications.
Professional quality CR-V sockets with impact grade S2 bits.
- 1/4": M4 | M5 | M6
- 3/8": M8 | M10 | M12
- 1/2": M14 | M16
Spline Impact Socket | M14 | 1/2" Sq Drv
A specialised spline socket with particular application for rear caliper bolts on Audi A3 | VW Golf | Passat, and upper ball joints on VW LT | Touran | T4 Transporter.
- M14 Spline socket
- 60mm overall length
- 1/2" Sq Drv
- Impact grade construction
Spline Impact Socket | M18 | 105mm
A specialised impact socket for servicing rear axle retaining screws on Audi / VW vehicles.
- M18 Spline
- 12 Point
- 3/4" Sq Drv
- 105mm long
- Impact grade
Spline Impact Socket | M18 | 78mm
A specialised impact socket for servicing rear axle retaining screws on Audi / VW vehicles.
- M18 Spline impact socket
- 12 Point
- 1/2" Sq Drv
- 78mm long