Pin plugs are designed to be hammered into the drive part of metric hex machine screws, effectively rendering them unremoveable. As such they convert a normal hex screw, into a one way 'security' screw.

• M10 size, to suit M16 hex screws
• SS304 construction
• Hammer pinplugs into the hex drive using a standard hammer. No special tools required.
• Once inserted, pin plugs cannot be removed.

A replacement jump starter cable for the Endeavour 12V Jump Starter. This cable is supplied with the ET6797A, but is also backward compatible with the ET6785 / ET6795 / ET6797 jump starters.

• For 12V Endeavour jump starters only
• This cable is NOT interchangeable with other brands of jump starters

A specialised Spline (Sec) socket for working on rear hubs on VW Golf | Jetta and other Mark IV chassis vehicles.

• M18 Spline (Sec)
• 78mm overall length
• 1/2" Sq Drv

Specialty socket which is slightly undersized to avoid damage when removing sump plugs / gear boxes on selected VAG vehicles.

• Type: Spline (Sec)
• Size: M16
• Length: 60mm
• Drive: 1/2" Sq Drv

Impact grade spline socket set covering popular sizes for VAG Group vehicles. Sockets are 1/2" Sq Drv by 78mm long.

• M12 (Rear hub nuts on Touran)
• M14 (Rear hub nuts on Transporter)
• M16S (Rear hub nuts on Sharan)
• M18S (Rear hub nuts on Golf)

This specialised spline security socket is required when working on rear hubs of VW Golf | Seat Leon vehicles.

• M18S Spline security
• 3/4" Sq Drv

A specialised spline bit socket for use on ball joints on VW LT | Transporter | Touran, and rear caliper bolts on VW Passat and Audi A3. Part of the Endeavour Tools range of specialised bit sockets.

• M14 Spline bit socket
• 100mm overall length
• 1/2" Sq Drv

A specialised spline bit socket for removing the bolts that connect the driveshaft to the gearbox, on VAG vehicles.

• M7 Spline bit socket
• 1/2" Sq Drv
• 55mm overall length