Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

• M10
• Chloride Zinc / Yellow Chromate plated

Specialised wrenches for servicing the diesel filter / sensor on Mazda SkyActiv-D2.2 engines.

• Engines: SH-VPTS | SH-VPTR
• Applications: CX-5 | CX-8 | Mazda 6 (Atenza) | Mazda 3 (Axela)
• Fuel filter wrench: 85mm x 15F
• Sensor wrench:50mm x 8F
• 1/2" Sq Drv

This fuel filter wrench is designed specifically for the newest 2.4L diesel variants of GWM vehicles.

• Engine codes: GW4D20M, GW4D24
• Applications: GWM Cannon | Cannon Alpha | Tank 300 | Cannon XSR
• For OEM filter: 1111402XED96

A specialised Spline (Sec) socket for working on rear hubs on VW Golf | Jetta and other Mark IV chassis vehicles.

• M18 Spline (Sec)
• 78mm overall length
• 1/2" Sq Drv

Specialty socket which is slightly undersized to avoid damage when removing sump plugs / gear boxes on selected VAG vehicles.

• Type: Spline (Sec)
• Size: M16
• Length: 60mm
• Drive: 1/2" Sq Drv

Impact grade spline socket set covering popular sizes for VAG Group vehicles. Sockets are 1/2" Sq Drv by 78mm long.

• M12 (Rear hub nuts on Touran)
• M14 (Rear hub nuts on Transporter)
• M16S (Rear hub nuts on Sharan)
• M18S (Rear hub nuts on Golf)

This specialised spline security socket is required when working on rear hubs of VW Golf | Seat Leon vehicles.

• M18S Spline security
• 3/4" Sq Drv

A specialised spline bit socket for use on ball joints on VW LT | Transporter | Touran, and rear caliper bolts on VW Passat and Audi A3. Part of the Endeavour Tools range of specialised bit sockets.

• M14 Spline bit socket
• 100mm overall length
• 1/2" Sq Drv

A specialised spline bit socket for removing the bolts that connect the driveshaft to the gearbox, on VAG vehicles.

• M7 Spline bit socket
• 1/2" Sq Drv
• 55mm overall length