Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

Say goodbye to the guesswork in electrical diagnostics. The ET7386 Short Circuit Diagnostic Kit is a professional-grade solution designed to streamline the process of tracing short circuits in automotive and electrical systems.

Manually Resettable Circuit Breaker Fuses: Includes 7 standard blade and 7 mini blade fuses ranging from 5A to 30A. These fuses trip like conventional ones but can be reset for repeated testing - no need to replace them after each fault.

• 7 standard blade / 7 mini blade resettable fuses
• Fuse ranges: 5A | 7.5A | 10A | 15A | 20A | 25A | 30A
• Includes 2x 300mm extension loops

Perform battery checks, charging system checks, fuse checks, voltage checks, component tests...

All at the flick of the switch, while being guided through with our two NEW menu options: EZLEARNING and EZDIAGNOSTIC.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze
• Limited edition carbon fibre skin

The Power Probe PP3EZ includes all the powerful testing modes and features of the Power Probe III plus now includes 2 new modes - EZ Learning Mode and EZ Diagnostics Mode. The PP3EZ speeds you through the diagnosing of 12 to 24 volt automotive electrical systems. After connecting the PP3EZ's clips to the vehicle's battery, the automotive technician can determine at a glance, the voltage level and the polarity of a circuit without running for a voltmeter or reconnecting hook-up clips from one battery pole to the other. The power switch allows the automotive technician to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components without wasting time with jumper leads.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze

All in one diagnostic solution: Test (and power up) components, trace wiring faults, and expand diagnostic capability with advanced tips.

• Locate short & open circuits fast
• Complete diagnostic kit with PP3EZ & ECT3000
• Sleek hard case with foam insert
• Activate components with power or ground
• Includes PPAMP & PPPWM tip adapters

The Power Probe 4 is a multi-use Circuit Tester with built-in diagnostic power.

This tool simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, communications circuits and computer drivers. The large LCD colour display makes viewing live test information and mode selection simplified in even direct sunlight or complete darkness.

• Supplies Power and Ground
• Digital voltmeter with Min/Max voltage capturing
• 20 ft power lead
• Tests for bad grounds / short circuits
• Powered by vehicle battery
• Gold plated brass probe tip
• Directed LED head lamps to illuminate test area
• Ohmeter / Frequency
• Pulse width (+tive & -tive)

Additional diagnostic modes:

• Petrol fuel injection tester
• PCM / ECM driver tester
• Signal tracer (use with ECT3000)

The Power Probe 4 Master Combo Kit combines the Power Probe 4, ECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.

The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The ECT3000 will help you trace short and open circuits quickly and accurately.

Apply voltage from the Power Probe tip to quickly actuate components.

• Test circuits for voltage, continuity or polarity. Green / red LEDs provide quick confirmation.
• 6m heavy duty extension lead.