A high quality, professional air inflating tool designed for precision, durability, and ease of use in automotive environments.

Built with Sonsbeek's reputation for dependable air tools, the 310PG5-DC features a dual chuck, a clear, easy-to-read gauge and a robust trigger mechanism, allowing operators to inflate, deflate, and measure tyre pressure with confidence and efficiency. Its solid construction ensures long-lasting performance even under frequent use.

• 0 - 160 PSI measurement range
• 1/4" NPT female inlet
• 427mm hose length

A handy power tool accessory - this impact grade bit holder attaches to any 1/2" male sq drv, for use with 10mm hex drive insert bits, which are commonly used in automotive applications.

• 1/2" Sq Drv
• For 10mm hex drv insert bits
• Impact grade

A very convenient tool to use in conjunction with the ETWH505H pressure brake bleeder. Use the wrench to open the nipple. Used brake fluid then flows through the hose (into any convenient disposal bottle). The one way valve prevents air from reentering the system.

• 10mm (6Pt) brake bleeder wrench
• Silicone hose, with one way valve

A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.

This kit is designed to be used with a bridge, and injector pullers. These are available separately.

• M14 x 1.5 pitch Pulling Spindle 240mm long.
• M14 x 1.5 pitch Pulling Spindle 315mm long.
• M17 x 1.0 pitch Pulling Spindle 240mm long.
• M17 x 1.0 pitch Pulling Spindle 315mm long.
• M18 x 1.5 pitch Pulling Spindle 315mm long.
• M25 x 1.0 pitch Pulling Spindle 240mm long.

A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.

The special extraction bridge and pull spindle allows for quick / safe injector removal.

To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.

• Engine codes: M47TU | M57 | M57TU
• Spindle 16 (one side M17) for mounting in the injector
• 29mm socket for disassembling the electric unit
• Internal 6 Pt wrench for removing the injector needle

A specialised kit for removing seized diesel injectors from VAG TDI engines, along with BMW N47 | N57 engines. The removers have a special two jaw design to fix the injector and pull out with a sllide hammer.

• Engine codes: BMW N47 | N57, VAG ALH | ALU | 1Z
• OEM Equiv: T10055 | T10402 | T10415 | T10163 | T40055

A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.

• Application: BMW 3.0L (2008 - 2016)
• Engine: N55 (from July 2013 onwards) - up to engine # 14407684
• OEM equiv: 130270 (13 0 270)

Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.

• Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
• Slide hammer thread: M12 | 175mm length (without adaptors).

Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.