This two piece disconnect kit suits most push / pull connectors on VAG vehicles - specifically connectors from FEP Fahrzeugelektrik Pirna. Ideal for use in areas with limited space.
- Two blade - 1 ~ 10 pin connectors
- Three blade - 1 ~ 14 pin connectors
- Not for connectors with CPA (Connector Position Assurance)
| SKU | ET7076 |
| Barcode # | 9321280426184 |
| Brand | Automotive |
| Product weight | 0.0180kg |
| Shipping weight | 1.950000kg |
| Vehicle Make | VAG |
12 Months
Others also bought
Alternator Tool Set | 13 Pce
A comprehensive tool set for removing alternator freewheel pulleys on a range of Bosch / Magneti Marelli type alternators.
This kit suits a wide range of vehicles including Audi | BMW | Fiat | Ford | Mercedes | Renault | Seat | VW.
- Includes Sockets: M10 Spline | T50 Torx (Bosch) | Bits: Hex - 8mm & 10mm | Spline - M8 & M10 | Torx T40 & T50
- 2x adaptors for Bosch / Magneti Morelli alternators a 1/2" Sq Drv >> hex adaptor, and 2x pulley connectors
Endeavour Pin Fit Master Kit
This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.
The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.
A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.
- Colour coded
- Made in USA
- Check socket fit condition
Clore Battery Stabiliser 12V / 24V
A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 120A indefinitely, with variable voltage. Plus functions as a 120A battery charger.
IMPORTANT SAFETY NOTICE: This unit must be connected to a 15A circuit. The power cord supplied with the ET6102 must be used with this unit. This 15A cord has a larger earth pin.
Grinding down the earth pin to suit a standard 10A outlet or using an alternative cable with a 10A plug will damage the unit and void the warranty.
Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.
- 120A battery stabiliser
- 12 / 24V operation
- 120A / 40A / 10A battery charging modes
- 13ft Cables
- 120A Max Output For Both Car / Truck Applications
- Extremely Low Peak To Peak Ripple Voltage
- Adjustable Voltage Output
- 7-Phase Battery Charging Sequence
- No Voltage Drop
- Lead Acid Plus Lifep04 Batteries
More from this category
Electrical Disconnect Pliers | Long Reach
Updated version with 'serrated' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.
- Spring loaded, for easy use
- Ergonomic molded handles for comfortable use
- Serrated tip to better grip connectors
- 215mm overall length
Electrical Disconnect Pliers | Sharp Tip
Updated version with 'sharp tip' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.
- Spring loaded, for easy use
- Ergonomic molded handles for comfortable use
- Sharp tip
- 185mm overall length
Endeavour Pin Fit Master Kit
This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.
The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.
A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.
- Colour coded
- Made in USA
- Check socket fit condition
Knorr Bremse Trailer Disconnect Kit (3 Pce)
The ET8040 disconnect kit is designed to assist with releasing electronic connectors on Knorr Bremse EBS modules. This kit comprises 3 tools for separating 2, 4, 6 & 12 pole electrical connectors on the trailer module, as well as a tool for loosening the bayonet nut on the power supply connection.
- Ideal for tight working areas on HGV trailers
- Manufactured from steel with vinyl dipped handles for improved comfort / grip
Push Tab Electrical Disconnect Pliers
Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.
- Long length swivel jaws provide access to deep seated / hard to reach connectors
- Applications include Fiat | Mercedes | VAG
System Release / Disconnect Kit (23 Pce)
An essential set of terminal release tools for cleaning / replacing / removing terminals from the plastic connectors on most wiring connectors without damaging them.
- 23 pce kit
- Please see download link for information on individual disconect tools
- Soft grip handles with number identification