The SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressurised smoke allows you to see where there may be leaks under simulated engine conditions.

Save time finding the leaks, fixing the correct areas and book more jobs with visual evidence of problems.

• Compact design / weighs under 2kg
• Under 10-second heat up time
• 5min auto stop enough for most diagnosis which can be cancelled or trigger another cycle
• Overheat protection
• Smoke is harmless and dense
• Replacement intake bladders available
• Detachable smoke hose and power cord
• Hook for hanging on the bonnet
• Up to 11.5PSI max pressure and 5LPM flow rate
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

• Pressure range: 0.5 - 17 PSI (adjustable)
• Use with supplied fluid (50ml), or optional dyes
• 12 month warranty
• Built in air compressor!
• Includes accessory kit!

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

• 8x10 12x14 13x15 16x18 17x19

Narrow 5.5mm camera for engine access.

Connects to your phone / tablet by wifi allowing results to be viewed clearly / easily saved.

• 1.5m gooseneck cable
• 1280 x 720px resolution
• Rechargeable battery

The SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressurised smoke allows you to see where there may be leaks under simulated engine conditions.

Save time finding the leaks, fixing the correct areas and book more jobs with visual evidence of problems.

• Compact design / weighs under 2kg
• Under 10-second heat up time
• 5min auto stop enough for most diagnosis which can be cancelled or trigger another cycle
• Overheat protection
• Smoke is harmless and dense
• Replacement intake bladders available
• Detachable smoke hose and power cord
• Hook for hanging on the bonnet
• Up to 11.5PSI max pressure and 5LPM flow rate
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

• Pressure range: 0.5 - 17 PSI (adjustable)
• Use with supplied fluid (50ml), or optional dyes
• 12 month warranty
• Built in air compressor!
• Includes accessory kit!

• Compatible with B series BMW engines. (Not compatible with N series).

Universal intake bladder for use with smoke machines to block off intakes to allow smoke / air pressure to build up to pinpoints leaks.

• Replacement rubber bladder (only) also available

This universal Smoke Machine Intake Bladder is a versatile, time saving solution designed to seal intake openings quickly and effectively during smoke testing. Compatible with most automotive and diagnostic smoke machines, this bladder allows for fast setup and reliable sealing across a wide range of engine intake sizes and configurations.

Manufactured from durable, heat resistant, and smoke safe materials, the bladder expands evenly to create an airtight seal without damaging intake components. Its universal design eliminates the need for multiple adapters, making it ideal for workshops, mobile diagnostics, and professional technicians who work across different vehicle platforms.

• Expandable sealing design
• Compatible with most smoke machines
• Replacement bladder available

This universal Smoke Machine Intake Bladder is a versatile, time saving solution designed to seal intake openings quickly and effectively during smoke testing. Compatible with most automotive and diagnostic heavy duty smoke machines, this bladder allows for fast setup and reliable sealing across a wide range of engine intake sizes and configurations.

Manufactured from durable, heat resistant, and smoke safe materials, the bladder expands evenly to create an airtight seal without damaging intake components. Its universal design eliminates the need for multiple adapters, making it ideal for workshops, mobile diagnostics, and professional technicians who work across different vehicle platforms.

• 3" diameter
• For heavy duty smoke machines (designed for truck intakes)

• Use with either smoke machine, or hand pump (with pressure gauge)