Replacement rubber bladder for the SmokeMan air intake bladder. This part is the rubber replacement bladder only - not the complete intake bladder.

• Replacement bladder for ET6614

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

• Pressure range: 0.5 - 17 PSI (adjustable)
• Use with supplied fluid (50ml), or optional dyes
• 12 month warranty
• Built in air compressor!
• Includes accessory kit!

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks, air tanks, braking systems etc...

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Advanced detector using ultrasonic waves to detect leaks in a range of automotive / industrial applications. Tone generator to check for faulty seals in non pressurised enclosures.

• Detect vacuum / compressed air leaks (down to .13mm)
• Gas turbulence / with air / gas line blockages
• Electrical discharge due to insulation breakdown
• Mechanical wear in bearings, race assemblies etc
• Detect leaks in door seals, vehicle compartments etc

Three-in-one leak detector solution - Air / smoke leak tests, Pressure decay and Vacuum leak (passive).

Compact, portable design with carry handle, and hook to hang it anywhere. Built in air compressor!

New 3.5" TFT colour display showing digital pressure, flow rate indication and real time test status.

• Use 12V vehicle battery as power supply
• Adjustable output pressure (0.5 - 20 PSI) for either EVAP or Turbo testing
• Supplied with comprehensive adaptor kit

• Compatible with B series BMW engines. (Not compatible with N series).

Specialised fluid for smoke machines, designed to produce a dense smoke. Compatible for use with most smoke machines, including our ET6610, ET6620 and ET6630.

Designed to leave no residue / produce less odour than using baby oil.

• 250ml container

• Use with either smoke machine, or hand pump (with pressure gauge)

• Fitting sizes: M8 | M12 to G1/8.

The SmokeMan diffuser is designed to make the output smoke columnar for testing the airtightness of vehicle doors and windows.

• Turn air conditioning output to maximum.
• Close vehicle doors.
• Move columnar smoke along doors / glass. Any movement away indicates a leak.