Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Replacement hot staple tip for the Endeavour PRO-80 plastic staple kit. This tip is included as part of the ETPRO-80PS kit.

Top of the range butane iron for the professional user. Patented LECª removable fuel cell for uninterrupted use, safety & reliability even at very lower temperatures. LECª refills easily with any brand of butane. LEC filters butane for no-clog operation.

Comes with soldering tips, safety wire stand, protective cap, solder, in a quality plastic case with foam insert.

• Automatic ignition
• 2 removable and refillable LEC (liquid energy cells)
• Includes solder, multiple tips, stand, protective cap and more
• Approximate tip temperature: 250 - 550 degrees C
• Torch temperature: 1300 degrees C

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations - all designed to suit Schrader tyre valves. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

• Clip On tyre chuck
• 1/4" BSP female inlet
• Non sealing type

Removes pin stripes, decals & stickers from vehicle paint work without damage. Arbor suits any die grinder.

• 4" diameter / 15mm thickness
• 5/16-24 UNC thread
• Arbor fits directly into drill chucks

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.

Replacement chisel welding tip for the ETPRO-PS kit.

Replacement dual welding tip for the ETPRO-PS kit.

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Replacement welding tip for the ETPRO-PS kit.

A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod