A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 38 - 64mm diameter
• Extra long hex rod

An oil filling funnel for Honda / Nissan vehicles. The funnel is designed to connect directly to oil filler necks, avoiding oil spills. Lower transparent chamber shows oil flows down to the engine.

Engine oil bottles can be put up side down - allowing a hands-free / one-person operation.

• Supplied with an extended 150 degree adaptor specially designed for Acura - MDX, RDX, ZDX, Honda Odyssey and Pilot.
• Also suits common Hyundai / Kia and Suzuki vehicles. Please see instruction manual for more details.
• M32 x P3.5 funnel thread

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Threaded collar suits Honda / Hyundai / Kia / MG / Nissan vehicles.

Transparent lower chamber. Funnel can be directly connected to oil filler neck

• Funnel thread: M33 x P3.5
• Please note that this funnel does not suit the Nissan Navara YS23DDTT engine

A specialised time saving oil funnel for VAG vehicles. This kit includes three adaptors that fit most late model VAG vehicles, plus some BMW / Mercedes.

Adaptors attach firmly to the oil filler neck allowing for spill free / one handed filling.

• Twist type adaptor for most recent VAG models.
• Clip type adaptor for VAG, as well as BMW / Mercedes
• Knob type adaptor for VAG EA211 EVO 1.5L petrol engines (OE code: 04E103485N)
• Transparent lower chamber. Refer to attached manual for vehicle fitment information.

Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 150W Hot staple tip
• 60W Plastic welding tip
• 60W Plastic welding tip with guide pipe
• Assorted staples / plastic rods
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Replacement chisel welding tip for the ETPRO-PS kit.

Replacement dual welding tip for the ETPRO-PS kit.

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Replacement welding tip for the ETPRO-PS kit.