A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod

Fast one handed removal of exhaust brackets from rubber hangers. Simply position the adjustable pin on the exhaust pipe rubber holder. Then press handles to remove the pin.

• Time saving tool.
• Suits most passenger vehicles, including Asian / European.
• Extra long handles to avoid hot exhaust pipes / provide more leverage.

A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod

Specialised EGR removal tool for Hyundai / Kia 2.0L | 2.2L diesel R engines. The tool allows for the disassembly of the EGR valve without damaging it.

Suitable for use with slide hammers.

• Engines: 2.0L | 2.2L diesel R
• Applications: Hyundai: Santa Fe | Tuscon, Kia: Carnival | Sorento | Sportage

This socket is specifically designed for AdBlue filter housing caps on Mercedes passenger car and commercial vehicles with BlueTec engines, including Actros, Atego, Axor, Econic. AdBlue additives are required for NOx emission controls.

• Engine codes include: OM642 | OM651
• 46mm diameter
• Single hex chrome socket
• 3/8" Sq Drv

A short series single hex oxygen sensor socket for the removal / installation of Oxygen / Lambda sensors. Designed with a slot in the side to allow it to be fitted over the wiring harness.

• Applications: Jeep Grand Cherokee 3.0L V6 diesel (from 2014) | Dodge RAM 1500 3.0L V6 Diesel (from 2014)
• Overall length - 70mm
• 24 mm diameter | 6Pt
• 1/2" Sq Drv (or can also be driven with a 30mm wrench

A specialised socket for removing / installing turbo inlet housing bolts on Nissan / Renault vehicles fitted with the R9M 1.6L diesel engine.

• Engine code: R9M
• Applications: Mitsubishi Express | Nissan Dualis | Qashqai | X-Trail, Renault Trafic
• 8 Pt | 10mm diameter
• 50mm overall length
• 1/4" Sq Drv