The SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressurised smoke allows you to see where there may be leaks under simulated engine conditions.

Save time finding the leaks, fixing the correct areas and book more jobs with visual evidence of problems.

• Compact design / weighs under 2kg
• Under 10-second heat up time
• 5min auto stop enough for most diagnosis which can be cancelled or trigger another cycle
• Overheat protection
• Smoke is harmless and dense
• Replacement intake bladders available
• Detachable smoke hose and power cord
• Hook for hanging on the bonnet
• Up to 11.5PSI max pressure and 5LPM flow rate
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Specialised fluid for smoke machines, designed to produce a dense smoke. Compatible for use with most smoke machines, including our ET6610, ET6620 and ET6630.

Designed to leave no residue / produce less odour than using baby oil.

• 250ml container

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Industry leading live graphing on colour screen.

100kPa pressure range, with adaptor kit included.

Use with scan tool live data to compare with actual pressure readings.

An essential workshop tool.

• Inlet manifold pressure
• DPF pressure gradient
• Turbo output pressure

Three-in-one leak detector solution - Air / smoke leak tests, Pressure decay and Vacuum leak (passive).

Compact, portable design with carry handle, and hook to hang it anywhere. Built in air compressor!

New 3.5" TFT colour display showing digital pressure, flow rate indication and real time test status.

• Use 12V vehicle battery as power supply
• Adjustable output pressure (0.5 - 20 PSI) for either EVAP or Turbo testing
• Supplied with comprehensive adaptor kit

The ET3142 is a professional-grade breakout box designed for advanced in-vehicle diagnostics and bench-top ECU testing on both 12V and 24V systems. It exposes every OBDII pin for full signal access, monitors live circuit voltages with true-RMS accuracy, and includes selectable CAN termination for controlled network testing. Its secure, high-speed interface allows safe integration of scopes, scan tools, and other diagnostic equipment, making it an essential tool for precise fault-finding, signal analysis, and ECU development work.

• Real Time VRMS Voltage Monitoring on All OBDII Pins - the integrated LCD displays true RMS voltage across all 16 pins, delivering accurate diagnostics even on fluctuating or noisy circuits. Green background highlights active dynamic signals, while immediate alerts help identify power or ground issues on critical pins (4, 5, and 16).
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks. This helps improve signal integrity, reduce line reflections, and stabilise communication during advanced diagnostic work.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

Highly sensitive hydrocarbon gas leak detector (<50ppm methane). Solid state semi conductor sensor. Made in the UK, and designed for professional use.

• Audible tic rate & multi coloured LED indicators
• Gases detected include acetone, ammonia, industrial solvents, methane, natural gas, petrol, propane

Highly accurate Differential Pressure Meter (± 15 psi)

Don't get caught out trusting inaccurate sensors; this is the ultimate tool for measuring actual DPF / CAT before and after pressure differential.

• Temperature compensated for superior accuracy
• High / Low resolution settings
• Modes: mbar, Pa, hPa, kPa, mmHg, mmH2O, inH2O, PSI
• Data hold and max/min recording
• Printouts include date/time and user details

The ET9806 is a compact, precision carbon monoxide detector designed for continuous ambient monitoring, delivering fast response and clear audible, visual, and vibrating alarms when CO levels rise. Its stable electrochemical sensing technology, peak level capture, and robust construction make it well suited for workshops, service bays, and industrial environments where reliable, real time CO safety monitoring is essential.

• Long Life CO Sensor for Reliable Monitoring
  - Equipped with a high quality, replaceable carbon monoxide sensor offering an expected 5 year lifespan, ensuring dependable long term performance.
  Yearly calibration is recommended for maintaining accuracy.
• Wide Measurement Range: 0-999 ppm CO
  - Accurately detects carbon monoxide levels from 0 to 999 ppm, providing precise readings for both safety checks and professional diagnostics.
• Premium UK Manufactured Quality
  - Built to the high standards of UK manufacturing, delivering durability, accuracy, and confidence for automotive and workshop environments.
• Multi Alert Safety System - 30PPM and above
  - Features audible, visual, and vibrating alarms to ensure immediate awareness of rising CO levels, ideal for technicians working in enclosed spaces.

Combining innovation and ease of use, the Kane opacity meter is designed to meet official test standards. Bluetooth enables for flexible operation, and results can be printed via infra red to verify readings.

• Fully portable. AC & internal rechargeable battery with up to 3 hours run time
• Ergonomic easy to use handset
• Compact rugged housing. Strong but light, and easy to position for all types of vehicles
• Bluetooth or cable operation
• Peak measurement Hu & /m
• Self calibration after each test maintains accuracy

Bundle & save!

Bundle includes ET6630 High Pressure smoke machine and ET5493 Truck Turbo Leak detector.

Bundle & save!

Bundle includes ET6620 Evap / Turbo smoke machine and ET5492 Car Turbo Leak detector.