Remove practically all types of lock nuts (INCLUDING those with rotating collars).
Place the supplied disposable key into the chamber and strike. The key will mould to the lock nut shape creating a temporary key to remove the lock nut.
- Creates a lock nut in under 3 minutes
- Includes a shield to protect the wheels from damage.
- Supplied with 3x key cutters (single use). Additional cutters are available separately.
- A real time saving tool!
- Replacement Cutters (5 Pack) ET6066-C5PK
| SKU | ET6066 |
| Barcode # | 9321280415010 |
| Brand | Automotive |
| Product weight | 2.6000kg |
| Shipping weight | 2.600000kg |
12 Months
You may also like
Wheel Nut Cutters (5 Pack)
Replacement cutters for use with ET6066. These cutters mould to the shape of the wheel nut, allowing for their removal. Universal application.
- 5 pack
Small Mandrel (ET6066 Kit)
Replacement small mandrel for the ET6066 Universal Locking Nut Removal kit.
Spring (ET6066 Kit)
Individual replacement spring for the ET6066 universal locking nut removal kit.
Others also bought
ETBBL Promo
Power Probe 4 Master Kit
The Power Probe 4 Master Combo Kit combines the Power Probe 4, ECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.
The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The ECT3000 will help you trace short and open circuits quickly and accurately.
Smoke Leak Detector | EVAP & Turbo
Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.
- Pressure range: 0.5 - 17 PSI (adjustable)
- Use with supplied fluid (50ml), or optional dyes
- 12 month warranty
- Built in air compressor!
- Includes accessory kit!
SmokeMan Digital Smoke Machine EVAP / Turbo
Three-in-one leak detector solution - Air / smoke leak tests, Pressure decay and Vacuum leak (passive).
Compact, portable design with carry handle, and hook to hang it anywhere. Built in air compressor!
New 3.5" TFT colour display showing digital pressure, flow rate indication and real time test status.
- Use 12V vehicle battery as power supply
- Adjustable output pressure (0.5 - 20 PSI) for either EVAP or Turbo testing
- Supplied with comprehensive adaptor kit
More from this category
BMW Wheel Lock Removal Kit
This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.
A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.
This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!
- Slide hammer: M16 x 1.5
Car Twist Removal Socket Set (7 Pce)
Twist sockets for removing damaged / rusted on hub nut sockets. Includes 24mm for Commodore hub nuts.
These twist sockets are for removal only, and will damage the wheel nut being removed. These twist sockets should NOT be used with air powered impact wrenches.
- 17 | 19 | 21 | 22 | 24 | 27mm
- 1/2" Sq Drv
Locking Wheel Nut Removal Sockets (2 Pce)
Specialised sockets for removing locking wheel nuts where no key is available. Chrome Moly | Impact grade for use with air impact wrenches. MAXIMUM AIR PRESSURE - 90 PSI.
Please note that the removal action will likely distort / damage wheel nuts, and replacement is recommended.
- Deep internal tapered reverse thread
- Suits 19, 21, 22mm wheel nuts (across flats)
- 1/2" Sq Drv
- 2 pce kit
Toyota Wheel Lock Removal Socket
Special inner design grips wheel locks on most cars / SUVs.
- For removal only.
- Do not use with impact tools
Twist Removal Socket | 17mm
Twist removal sockets are designed for aggressively removing worn or rusty nuts. These sockets are for removal only.
Do NOT use with an air powered impact wrench.
- 17mm twist socket
- 50mm overall length
- 1/2" Sq Drv