An oil filling funnel for Toyota vehicles. The threaded funnel is designed to connect directly to oil filler necks, avoiding oil spills. Lower transparent chamber shows oil flows down to the engine.

Engine oil bottles can be put up side down - allowing a hands-free / one-person operation.

• M37 x 3.0 thread

An incredibly handy set of wheel nut sockets. These flip sockets include new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

• Sizes: 17 x 19mm | 17.5mm | 18.5 x 19.5mm | 21 x 21.5mm | 22 x 22.5mm
• 1/2" Sq Drv extension (75mm long)

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

Air powered, simply requiring regulated working pressure of 5-8 bar (<100 l/min).

Australia's most comprehensive adaptor kit (24 pce) to suit Bosch, CAT, Cummins, Denso, Delphi, Siemens ...

• Revolutionary! Vibratory hammer action slashes removal time.
• M14 thread

Designed for efficient and safe separation of oil sumps, cylinder heads, manifolds, and other engine components. This kit is especially useful when working on engines, gearboxes, final drive casings, and even gasketed BEV and hybrid components like inverter unit lids.

• Dual blades - black high carbon steel for tough jobs, and brass blade for aluminium oil pans
• Clean up discs - 15x high quality 3M pads to remove residual gasket sealant / debris

This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.

A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.

This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!

• Slide hammer: M16 x 1.5

Twist sockets for removing damaged / rusted on hub nut sockets. Includes 24mm for Commodore hub nuts.

These twist sockets are for removal only, and will damage the wheel nut being removed. These twist sockets should NOT be used with air powered impact wrenches.

• 17 | 19 | 21 | 22 | 24 | 27mm
• 1/2" Sq Drv

Specialised sockets for removing locking wheel nuts where no key is available. Chrome Moly | Impact grade for use with air impact wrenches. MAXIMUM AIR PRESSURE - 90 PSI.

Please note that the removal action will likely distort / damage wheel nuts, and replacement is recommended.

• Deep internal tapered reverse thread
• Suits 19, 21, 22mm wheel nuts (across flats)
• 1/2" Sq Drv
• 2 pce kit

Special inner design grips wheel locks on most cars / SUVs.

• For removal only.
• Do not use with impact tools

Twist sockets for removing damaged / rusted on truck hub nut sockets.

These twist sockets are for removal only, and will damage the wheel nut being removed. These twist sockets should NOT be used with air powered impact wrenches.

• Sizes: 28 | 30 | 32 | 33 | 34 | 36mm
• 1/2" Sq Drv