A specialised kit for servicing Gen II wheel hubs / bearings on Ford vehicles with 82mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.
Always adequately lubricate threaded force screws and thrust bearings.
- 82mm diameter
| SKU | ET4264 |
| Barcode # | 9321280392649 |
| Brand | Automotive |
| Product weight | 10.5000kg |
| Shipping weight | 10.500000kg |
| Vehicle Make | Ford |
12 Months
Others also bought
Endeavour 80W Rechargeable Plastic Staple Kit
Repair and reinforce cracked plastic components with the ENDEAVOUR ETPRO-80PS rechargeable plastic repair kit. Use the hot-staple tip to strengthen cracks or the plastic-welding tips with the included rods. The kit includes assorted staples and rods, a guide-pipe welding tip, LED work lights and a battery indicator, with a maximum temperature of 650¡C.
- 150W Hot staple tip
- 60W Plastic welding tip
- 60W Plastic welding tip with guide pipe
- Assorted staples / plastic rods
- 650 deg C max temperature
- Battery power indicator
- LED lights for illumination
- 17 tips available separately
More from this category
2-9/16" 6Pt Wheel Bearing L
Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.
- 2-9/16" (65mm) opening
- 98mm overall length
- 3/4" Sq Drv
3-1/4" 6Pt Wheel Bearing Lo
Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.
- 3-1/4" (83mm) opening
- 98mm overall length
- 3/4" Sq Drv
3-1/4" 8Pt Wheel Bearing Lo
Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.
- 3-1/4" (83mm) opening | 8 Point
- 98mm overall length
- 3/4" Sq Drv
Adjustable Wheel Bearing Lo
Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.
- 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
- 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
- Pin diameters: 1/4" | 5/16" | 3/8"
Axle Locking / Drive Flange
This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.
The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.
- Allows easy removal of driveshaft / hub fixings.
- One person operation.
Bearing Removal Adaptor Kit
A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.
- Suitable for use with impact wrench
- Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura