A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Alkaline Cleaners
• Degreaser
• Anti Splatter chemicals
• Methylated Spirits (Denatured Alcohol)
• Comes with 1.5L container

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

• Allows easy removal of driveshaft / hub fixings.

• One person operation.

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura

A specialised kit for servicing Gen II wheel hubs / bearings on Ford | Volvo vehicles with 78mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

• 78mm dia front bearings
• Applications: Ford: Focus II (LS / LT) | C-Max, Mazda: 3 (BK / BL), Volvo: C30 | C70 | S40 | V50

An essential time saving service kit for working on Transit (>06) wheel bearings and brakes on the front axle. Permits correct dismantling of the wheel bearing, with hub and brake disc.

Ford Transits (from 2006) have a design whereby the brake disc is positioned behind the wheel hub. Accordingly every brake disc changes requires the wheel bearing housing with wheel hub to be first removed.

• Removal of wheel bearing housing with hub
• Changing of brake disc
• Changing of wheel bearings
• Removal of the bearing inner race from hub

A specialised kit for servicing Gen II wheel hubs / bearings on Ford vehicles with 82mm diameter front wheel bearings. These tools ensure that the insertion loads are taken only on the outer race of the bearing. Gen II wheel bearings are a wheel bearing / drive flange that cannot be separated.

Always adequately lubricate threaded force screws and thrust bearings.

• 82mm diameter

Special socket for adjusting castellated axle lock nuts on Transit vehicles (80 | 100 | 115 | 120) with RWD type 34 axles.

• 63mm OD | 53mm ID
• 4 Pin design
• 1/2" Sq Drv