A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.

• Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
• J1939 / J1708 and OBDII Protocols covered
• Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
• Full Mercedes Sprinter coverage
• Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
• Easy updates via WiFi
• IP65 rating | water resistant
• Remote diagnostics via TeamViewer
• Powerful 1.8GHz quadcore processor
• Includes: Multiple connectors, docking station
• Local Australian support
• Global coverage
• Bus, Commercial, Agriculture, Off Highway
• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away
• We regularly test local Australian vehicles for any updates required
• Regular updates & bug fixes (rather than waiting for bi yearly fixes)
• 2 years free updates for all vehicle categories (a $2,800 value)
• No lock out once updates expire
• 4G Sim Card enabled
• Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado

Coverage from Commercial to and including DPF regeneration

A specialised suspension tool for removing Tesla Model 3 / Y rear steering knuckle bushings.

This time saving tool allows for removal / installation of bushing / ball joints without detaching the knuckle. Kit includes high strength steep press cups and threaded rods for stable and precise operation.

• Suits OE rear knuckles: 1044411-00-G / 1044411-00-F / 1288416-00-A
• OE equiv: GB0-0360 / 1188412-01-E

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A great tool for extracting surplus diesel when disconnecting the fuel filter. And then to reinsert diesel to prime diesel fuel filters after replacement. Supplied with quick release connectors to suit most vehicles.

• Transparent design | Rotative switch off
• Adaptors: male 5/16" | 3/8" male, female 5/16" | 3/8"
• 1.5 litre capacity

A multipurpose fluid syringe ideal for the transfer of brake fluid, and other fluids from components such as differentials / gearboxes.

This syringe is fitted with EPDM seals which are designed for brake fluid. NBR seals are available as an option for oil transfer.

We supply these syringes with a BONUS wall mount.

• 200ml capacity
• Robust plastic construction
• Transparent design
• Dual seals

Next gen rechargeable pump for transferring a wide variety of workshop fluids, including DEF / Adblue.

• 2900mAh lithium battery can discharge up to 300 litres. Recharge using USB cable.
• Adjustable telescopic suction tube (380-520mm)
• Suitable fluids include Antifreeze, Windshield fluid, Kero, Diesel, AdBlue & oils (up to ISO 32). Do not use with Acids, Acetone, Petrol.

An easy and safe solution for transferring fluids, especially media which is unsafe for body contact. Draws in & pumps out liquid in a single stroke.

Ideal for fuel oils, mineral oils, synthetic & biological oils, cooling liquids and spirits.

• Rugged aluminium die cast head
• NBR seals (not suitable for use with brake fluid)
• 450ml transfer container
• Supplied with 8 foot of vinyl hose (4 foot with each valve)

A convenient transfer syringe with a 1.5 litre capacity, and 400mm extension tube.

This syringe is made from a high quality plastic that is resistant to most workshop fluids. The NBR seals supplied with this unit are designed for oil recovery, and should not be used with brake fluid (or other corrosive fluids like petrol / diesel).

• Robust plastic construction
• Transparent design
• Dual NBR seals