When you need a professional, durable, dependable sprayer. Made in Europe quality...

This unit is ideal for use with brake cleaner / tyre shine (petroleum based only - for silicon refer 124EP15) / diesel / kerosene / Prepsol / Turpentine.

• Viton seals / PA plastic, resistant to most hydrocarbon based solvents
• Viewing stripe with graduated scale
• Innovative pressure release button
• Protective cap to protect the one way return valve
• Stable base
• Large 1.5L tank
• Replacement seal kits available
• Brake Cleaner* excluding CRC Brakleen (due to acetone)
• Tyre shine

For press type disconnection clips on Chrysler, Ford, Holden etc.

• Fuel line: 5/16” & 3/8”
• Air con: 3/8” | 1/2" | 5/8 ” | 3/4"

Adjustable jaw design makes these pliers ideal for removing quick connnect, snap and side & lock couplers, on a wide range of vehicles.

• Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Fiat, GM, Lancia, Lexus, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Toyota, VW etc

Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.

• Engines: BMW Mini N13 / N18
• Applications: BMW / Mini 1 & 3 series F20 / F30
• OEM equiv: 8330496242

Quickly / safely disconnect the higher pressure fuel line from the mechanical high pressure fuel pump on selected BMW Mini turbo engines from 2007 - 2013.

Please note that if the release tabs have been damaged, this tool cannot be used, and the fuel line may need to be replaced. In addition, on some engines it may be necessary to first remove the 14mm flare nut on the fuel feed line. Please see attached PDS.

• Engines: BMW Mini N14 | N18
• OEM equiv: 130250

Special kit for inline connection into low pressure fuel delivery systems, for bleeding / priming.

• Six connectors: Holden | Renault | Fiat | Ford | PSA (8mm & 10mm)
• Clear pipes allow air bubbles to be seen

Disconnects stubborn heater hose fittings on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.

• Made from heavy duty nylon