An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

Cleaning tools for injector shaft / injector pump cleaning, and other similar applications.

Removes carbon deposits which is important when replacing injectors to avoid leaks.

• Brushes - 2 x 18mm / 2 x 19mm / 2 x 21mm / 2 x 24mm / 2 x 26mm Brushes - 2 x 9mm x 100mm (300mm length)
• Twisted Wire Brush x 2
• Flexible Bit Holder x 1
• Brush Holder with Adapter x 1
• Mounting Bar
• Sealing Plugs x 8
• Plastic Sleeve for Brush

Illuminate your workspace with the versatile and powerful GROZ LED-186 Torch. This inspection light is designed to meet the demands of various industrial, automotive, and DIY applications. Here are its standout features:

• Dual Head Worklight: Equipped with two 5W COB lights, the GROZ LED-186 allows you to use both lights together or separately, providing up to 1000 lumens of bright, clear light.
• Adjustable Light Intensity: Easily control the light intensity from 50 to 500 lumens per light using the rotating knob, ensuring you have the right amount of light for any task.
• 360¡ Flexible Neck: The heavy-duty flexible neck can rotate and bend 360¡ horizontally and vertically, making it perfect for illuminating tight spaces and hard-to-reach areas.
• Sturdy Construction: Built to withstand tough job site conditions, the torch features an impact-proof ABS body and a sturdy polycarbonate lens. It is rated IK07 for impact resistance and IP54 for protection against dust and water spray.
• Hands-Free Operation: The torch includes a strong magnet on the base for direct attachment to any metallic surface, and a built-in magnet on top to pick up small metallic parts.
• Convenient Charging: The torch is powered by a 3.7V 2600 mAh Li-Ion battery, which can be quickly recharged using the Type C fast charging feature. Battery status is indicated by three LEDs, each showing 33% of the charge.
• User-Friendly Design: The torch has a nylon hook with a ratcheting mechanism that can be rotated 360¡ for convenient placement. It also features a memory function that allows it to turn on from where it was last used.

For press type disconnection clips on Chrysler, Ford, Holden etc.

• Fuel line: 5/16” & 3/8”
• Air con: 3/8” | 1/2" | 5/8 ” | 3/4"

Adjustable jaw design makes these pliers ideal for removing quick connnect, snap / side lock couplers on a wide range of vehicles.

Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.

• Engines: BMW Mini N13 / N18
• Applications: BMW / Mini 1 & 3 series F20 / F30
• OEM equiv: 8330496242

Quickly / safely disconnect the higher pressure fuel line from the mechanical high pressure fuel pump on selected BMW Mini turbo engines from 2007 - 2013.

Please note that if the release tabs have been damaged, this tool cannot be used, and the fuel line may need to be replaced. In addition, on some engines it may be necessary to first remove the 14mm flare nut on the fuel feed line. Please see attached PDS.

• Engines: BMW Mini N14 | N18
• OEM equiv: 130250

Special kit for inline connection into low pressure fuel delivery systems, for bleeding / priming.

• Six connectors: Holden | Renault | Fiat | Ford | PSA (8mm & 10mm)
• Clear pipes allow air bubbles to be seen

Disconnects stubborn heater hose fittings on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.

• Made from heavy duty nylon