Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.

This tool is designed to easily remove / install copper washers in deep seated injectors.

To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.

• 7mm ID | 230mm reach
• For deep seated injector seals

The ET7522 Fuel Gauge Sender Collar Wrench is a specialty tool designed for the safe and efficient removal and installation of fuel sender unit retaining collars. Whether you're working on modern fuel systems or performing tank maintenance, this tool ensures a damage-free process.

Key Features

This tool is designed to cut the oil filter before recycling, in order to extract any residual oil.

The tool features a two bearing design, to make it easier to rotate the oil filter. The blade is made from a hardened SKH9 steel, while the body is made from an aluminium steel alloy for lighter / more durable construction.

• The cutter incorporates a longer body to allow the unit to be used to cut oil filters with a diameter from 60mm - 140mm.

The SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressurised smoke allows you to see where there may be leaks under simulated engine conditions.

Save time finding the leaks, fixing the correct areas and book more jobs with visual evidence of problems.

• Compact design / weighs under 2kg
• Under 10-second heat up time
• 5min auto stop enough for most diagnosis which can be cancelled or trigger another cycle
• Overheat protection
• Smoke is harmless and dense
• Replacement intake bladders available
• Detachable smoke hose and power cord
• Hook for hanging on the bonnet
• Up to 11.5PSI max pressure and 5LPM flow rate
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids
• Auto shut off function.

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• EC5 connector for lithium jump packs
• For 12V systems only

Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

Time saving tool for testing electronic components actuated by a magnetic field. Positive / negative sensor. Batteries included.

Test devices like ignition coil, AC generator, EGR valve controller, relay & hall effect sensors etc.

• 2x AA Batteries included.