A precision instrument to accurately measure the strength of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue^¨ content. A very versatile unit, especially with the ability to measure AdBlue concentration.

• Temperature corrected prism for improved accuracy
• Adjustable focus eyepiece
• Simple calibration using distilled water
• Supplied with pipette & storage case

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks, air tanks, braking systems etc...

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Provides real time thermal imaging / surface temperature measurement. This unit features a digital camera to pinpoint the test area, over which the thermal image is overlaid.

Detect heat spots not visible to the naked eye!

Ideal for automotive, construction, electrical. For example, overheating wiring, hot / cold spots in brakes, wheel bearings, cooling systems, exhaust, fuse box, seats etc.

Updated version ! Wifi connectivity, rechargeable battery.

• 256 x 192px infrared resolution
• -20 deg C to 550 deg C temperature measurement range
• 3.5" colour screen
• 6.6GB internal storage
• Rechargeable 26650mAh battery

For press type disconnection clips on Chrysler, Ford, Holden etc.

• Fuel line: 5/16” & 3/8”
• Air con: 3/8” | 1/2" | 5/8 ” | 3/4"

Adjustable jaw design makes these pliers ideal for removing quick connnect, snap / side lock couplers on a wide range of vehicles.

Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.

• Engines: BMW Mini N13 / N18
• Applications: BMW / Mini 1 & 3 series F20 / F30
• OEM equiv: 8330496242

Quickly / safely disconnect the higher pressure fuel line from the mechanical high pressure fuel pump on selected BMW Mini turbo engines from 2007 - 2013.

Please note that if the release tabs have been damaged, this tool cannot be used, and the fuel line may need to be replaced. In addition, on some engines it may be necessary to first remove the 14mm flare nut on the fuel feed line. Please see attached PDS.

• Engines: BMW Mini N14 | N18
• OEM equiv: 130250

Special kit for inline connection into low pressure fuel delivery systems, for bleeding / priming.

• Six connectors: Holden | Renault | Fiat | Ford | PSA (8mm & 10mm)
• Clear pipes allow air bubbles to be seen

Disconnects stubborn heater hose fittings on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.

• Made from heavy duty nylon