Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/2" (98mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-7/8" (98mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

>Black Snake random orbital sanders with Central Vacuum system are engineered for high-efficiency surface preparation and ultra-smooth finishing.

Designed for professional environments requiring dust controlled operations, these sanders combine powerful performance with excellent dust extraction capability.

• Central vacuum
• 2.5mm fine orbit action
• 3" low profile pad, perfect for spot repair, edge work and tight area sanding
• Air Consumption: 3.0 CFM
• RPM: 12,000
• 1/4" air inlet

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

• Allows easy removal of driveshaft / hub fixings.

• One person operation.

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura