Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/2" (98mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 4-1/8" (105mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Designed to allow the use of an extension / torque wrench to tighten the socket.

• 3-3/4" (95mm) opening | 6 Pt
• 98mm overall length
• 3/4" Sq Drv

The Air Boy 124140113 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 500mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 500mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 2-9/16" (65mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered hex nut on truck wheel bearing lock nuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening
• 98mm overall length
• 3/4" Sq Drv

Deep clearance socket for tightening special round cornered 8 point nuts on truck wheel bearing locknuts. Use with extension / torque wrench.

• 3-1/4" (83mm) opening | 8 Point
• 98mm overall length
• 3/4" Sq Drv

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

This specialised tool locks the drive flange to prevent rotation when servicing the inner drive shaft mounting bolts / hub nuts.

The specially designed plastic wheels wedge between the brake caliper and the drive flange, using the vehicle's own wheel bolts or nuts.

• Allows easy removal of driveshaft / hub fixings.

• One person operation.

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura