The Endeavour ET5116 is a heavy-duty hydraulic cable crimper designed for professional use in automotive, marine, industrial, and electrical applications. Engineered to deliver powerful and precise crimping, up to 13 Ton crimping force. This tool is ideal for working with large cable lugs ranging from 16mm to 300mm . 11 interchangeable hex dies included.

• Dies: 16, 25, 35, 50, 70, 95, 120, 150,185, 240, 300mm

Contains all tools needed for Ranger 2.2L / 3.2L timing (including automatic transmissions), plus high pressure pump puller / locking tools.

The oil seal installation tool is available separately. Refer ET9161.

• OEM Equiv: 303-249 | 303-1317 | 303-1562 | 303-1587

Easily remove / install suspension struts whilst leaving the hub on vehicle. Universal design for use on most passenger cards and light commercial vehicles.

• 5 - 14mm maximum spread (reduces risk of damage to hubs)
• 17mm hex drive (use with hand tools only)

Comprehensive non insulated terminal and Anderson plug crimper kit for battery terminal applications.

• Non insulated terminals
• 50 Amp housing / contacts / dust cover / handles / clamps
• Ratcheting crimper (AWG 20-16 | 16-14 | 12-10 | 8
• Cable cutters (cuts up to 38mm2 soft wire)

A two bladed model for RG-58 | 59 | 62 | 6 | 3C | 4C | 5C cable. Suits cables with a diameter from 4.9mm2 to 7.5mm2.

This tool is efficiently designed to make wire stripping quick and easy. The tool can strip and cut wire from 1.13mm (squared) - 6.0mm (squared). It can also be used to crimp insulated / non-insulated terminals.

Widely used by Caterpillar, Harley, Kenworth etc. This kit contains 6 dies for common Deutsch terminals.

• K1: AWG 14/12 (DT / P)
• K2: AWG 10/12 (DT / P)
• K3: AWG 18/16/14 (DT / M)
• K4: AWG 20/18/16 (DT / M)
• K5: AWG 20/18 (DT / M)
• K6: AWG 16/14/12 (DT / P)

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die