The Power Probe 4 is a multi-use Circuit Tester with built-in diagnostic power.

This tool simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, communications circuits and computer drivers. The large LCD colour display makes viewing live test information and mode selection simplified in even direct sunlight or complete darkness.

• Supplies Power and Ground
• Digital voltmeter with Min/Max voltage capturing
• 20 ft power lead
• Tests for bad grounds / short circuits
• Powered by vehicle battery
• Gold plated brass probe tip
• Directed LED head lamps to illuminate test area
• Ohmeter / Frequency
• Pulse width (+tive & -tive)

Additional diagnostic modes:

• Petrol fuel injection tester
• PCM / ECM driver tester
• Signal tracer (use with ECT3000)

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die

Provides real time thermal imaging / surface temperature measurement. This unit features a digital camera to pinpoint the test area, over which the thermal image is overlaid.

Detect heat spots not visible to the naked eye!

Ideal for automotive, construction, electrical. For example, overheating wiring, hot / cold spots in brakes, wheel bearings, cooling systems, exhaust, fuse box, seats etc.

Updated version ! Wifi connectivity, rechargeable battery.

• 256 x 192px infrared resolution
• -20 deg C to 550 deg C temperature measurement range
• 3.5" colour screen
• 6.6GB internal storage
• Rechargeable 26650mAh battery

This 4 way indent crimper crimps pins, round barrel contacts and sockets. A built in locator ensures accurate positioning of the pin & socket before crimping.

An Essential tool for Caterpillar, Kenworth & Harley mechanics

• Application: AWG 26-20, RS232 D-Sub 35-465
• Full cycle ratchet ensures a high quality, consistent crimp
• Adjustable pin height locator

An essential tool for Harley & Caterpillar mechanics.

This tool crimps round barrel contacts, pins and sockets. A built in locator ensures accurate positioning on the pin and socket, for a perfect crimp.

Adjustable pin height locator.

• D-Sub Deutsch 4 way indent crimper
• 0.5-4mm2 | AWG 20-12

A specialised set of three disconnect tools to remove Deutsch terminals from connectors fitted to Caterpillar, Harley Davidson, Kenworth etc.

• 14 | 16 | 20mm blade tools
• Stainless steel slotted tubes

A specialised set of three disconnect tools to remove Deutsch terminals from connectors fitted to Caterpillar, Harley Davidson, Kenworth etc.

• 4, 8, 12, 14, 16, 20mm blade tools + Wedge Removal / Flat Tip screwdriver
• Stainless steel slotted tubes