A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

This high speed single action sander is designed to directly mount Roloc style CDR pads. A high quality compact unit, ideal for panel work.

We supply this sander with a bonus pack of 2" and 3" backing pads, and roloc style discs in fine / medium / coarse. The backing pads, and roloc discs are also available separately.

• Includes: 2" & 3" holders and bonus pads.
• Spindle Size 1/4-20 UNF
• Weight kg/(lb) 0.50/(1.10)
• Avg.Air Consumption CFM/(L/S) 2.5/(1.2)

The Endeavour ET5116 is a heavy-duty hydraulic cable crimper designed for professional use in automotive, marine, industrial, and electrical applications. Engineered to deliver powerful and precise crimping, up to 13 Ton crimping force. This tool is ideal for working with large cable lugs ranging from 16mm to 300mm . 11 interchangeable hex dies included.

• Dies: 16, 25, 35, 50, 70, 95, 120, 150,185, 240, 300mm

The SmokeMan smoke machine is the perfect diagnostic tool for testing for engine, coolant or exhaust leaks.

Filling the cavity with pressurised smoke allows you to see where there may be leaks under simulated engine conditions.

Save time finding the leaks, fixing the correct areas and book more jobs with visual evidence of problems.

• Compact design / weighs under 2kg
• Under 10-second heat up time
• 5min auto stop enough for most diagnosis which can be cancelled or trigger another cycle
• Overheat protection
• Smoke is harmless and dense
• Replacement intake bladders available
• Detachable smoke hose and power cord
• Hook for hanging on the bonnet
• Up to 11.5PSI max pressure and 5LPM flow rate
• Inbuilt compressor - no airline needed
• Accessory kit for universal connection to most light vehicles
• 12 month warranty

Comprehensive non insulated terminal and Anderson plug crimper kit for battery terminal applications.

• Non insulated terminals
• 50 Amp housing / contacts / dust cover / handles / clamps
• Ratcheting crimper (AWG 20-16 | 16-14 | 12-10 | 8
• Cable cutters (cuts up to 38mm2 soft wire)

A two bladed model for RG-58 | 59 | 62 | 6 | 3C | 4C | 5C cable. Suits cables with a diameter from 4.9mm2 to 7.5mm2.

This tool is efficiently designed to make wire stripping quick and easy. The tool can strip and cut wire from 1.13mm (squared) - 6.0mm (squared). It can also be used to crimp insulated / non-insulated terminals.

Widely used by Caterpillar, Harley, Kenworth etc. This kit contains 6 dies for common Deutsch terminals.

• K1: AWG 14/12 (DT / P)
• K2: AWG 10/12 (DT / P)
• K3: AWG 18/16/14 (DT / M)
• K4: AWG 20/18/16 (DT / M)
• K5: AWG 20/18 (DT / M)
• K6: AWG 16/14/12 (DT / P)

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die

• Spark Plug connector (HJ12-H1)
• Weatherpack terminals (HJ12-H5)
• Non-Insulated terminals (HJ12-B)
• Open Barrel terminals (0.5-6mm 2 ) (HJ12-C)
• Open Barrel terminals (0.1-1.0mm 2 ) (HJ12-C1)
• Open Barrel terminals & D-SUB, V3.5
(0.5?10mm 2 ) (HJ12-H)