This tool is efficiently designed to make wire stripping quick and easy. The tool can strip and cut wire from 1.13mm (squared) - 6.0mm (squared). It can also be used to crimp insulated / non-insulated terminals.

Comprehensive non insulated terminal and Anderson plug crimper kit for battery terminal applications.

• Non insulated terminals
• 50 Amp housing / contacts / dust cover / handles / clamps
• Ratcheting crimper (AWG 20-16 | 16-14 | 12-10 | 8
• Cable cutters (cuts up to 38mm2 soft wire)

This tool is efficiently designed to make wire stripping quick and easy. The tool can strip and cut wire from 1.13mm (squared) - 6.0mm (squared). It can also be used to crimp insulated / non-insulated terminals.

Widely used by Caterpillar, Harley, Kenworth etc. This kit contains 6 dies for common Deutsch terminals.

• K1: AWG 14/12 (DT / P)
• K2: AWG 10/12 (DT / P)
• K3: AWG 18/16/14 (DT / M)
• K4: AWG 20/18/16 (DT / M)
• K5: AWG 20/18 (DT / M)
• K6: AWG 16/14/12 (DT / P)

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die

• Spark Plug connector (HJ12-H1)
• Weatherpack terminals (HJ12-H5)
• Non-Insulated terminals (HJ12-B)
• Open Barrel terminals (0.5-6mm 2 ) (HJ12-C)
• Open Barrel terminals (0.1-1.0mm 2 ) (HJ12-C1)
• Open Barrel terminals & D-SUB, V3.5
(0.5?10mm 2 ) (HJ12-H)