• 3:1 Shrink ratio
• Butt connectors
• Ring / spade terminal
• Male / female disconnector

A specialised set of Torx Plus bit sockets / impact sockets. Torx Plus fasteners are widely used in the automotive sector, and have a six lobe design, but with a different geometry than standard Torx sockets.

This kit contains 13 sockets from size TP10 - TP80, including TP50 / TP55 which are used with late model Subaru engines.

• 3/8" Sq Drv: TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50, 1/2" Sq Drv: TP55 | TP60 | TP70 | TP80
• 48mm overall length

12 point sockets with cut away profile for servicing strut nuts. These five sockets cover most sizes required for European vehicles.

The cut away design allows access for a hex key to hold the strut while tightening the nut to the specified torque with a torque wrench (hex key is not supplied).

• Sizes: 18 | 19 | 21 | 22 | 24mm
• 1/2" Sq Drv

This kit contains a special cap, and gauge in order to test oil pressure on a range of BMW engines.

• Engines: N20 | N46 | N55
• OEM equiv: 119250

A manual type vacuum pump for extracting engine oil (and ATF / coolant) etc. Includes a 5.6mm OD suction probe which fits most dipstick tubes.

This kit is NOT suitable for extracting petrol / diesel fluids, as the sealants used in this kit are not fuel / solvent resistant.

• 6 litre tank capacity
• Plastic base to step on to stabilise the tank while pumping
• Conical pour spout for spill free waste oil discharge

This special socket is designed for removing / installing the oil pressure control solenoid switch on M651 diesel engines. Designed to fit OEM control solenoid A 651 180 01 15.

• Engines: OM651.91 | OM651.92 | OM651.93 | OM651.94 | OM651.95 | OM651.96
• 43.5mm dia / 6 point
• Use with 1/2" Sq Drv ratchet / 24mm spanner
• OEM Equiv: 651589000900

This deep, dual opening, oil pressure switch socket is designed to fit most oil pressure switches on cars fitted with warning lights.

• Dual openings: 1 inch (25mm) | 1-1/16 inch (27mm)
• Use with 1/2" Sq Drv socket bar

Dual sized extra deep sockets to suit most oil pressure switches on vehicles with warning lights.

• Dual openings: 1Ò (25mm) | 1-1/16Ò (27mm)
• 3/8" Sq Drv

For quick removal / replacement of oil pressure sending units. Two step design fits 1" and 1-1/16" oil sending units.

• 3/8" Sq Drv
• 55mm overall length