An essential tool for every mechanic! Quickly / safetly removes wires from connectors, avoiding damage to wires and connectors.

• Fork for ALDL connectors
• Flat blade to open
• Rectangular for pack-con terminals
• Prongs depress barbs on standard terminals

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

The Power Probe 3 with PowerFlowª Technology is built for technicians who need faster, more confident electrical diagnostics on 12V and 24V vehicle systems. It combines the trusted functionality of the Power Probe 3 with advanced circuit-loading capability, allowing technicians to measure voltage, apply battery power or ground, check resistance, activate components, and verify circuit integrity under real-world load conditions. With PowerFlowª, hidden faults such as high resistance, corrosion, weak grounds, and excessive voltage drop can be exposed quickly Ñ helping reduce guesswork, avoid unnecessary parts replacement, and speed up every diagnostic job.

• PowerFlowª Circuit Loading Technology - Actively load positive or negative circuits to test wiring under real operating conditions. PowerFlowª helps reveal voltage drop, high resistance, weak grounds, corrosion, damaged wiring, and poor connections that may not appear during standard no-load voltage testing.
• Apply Battery Power or Ground - Quickly supply 12V or 24V battery power or ground directly to components for fast functional testing. Ideal for checking motors, lights, relays and other electrical components.
• Resistance Measurement up to 25 k - Measure resistance to help verify component specifications, identify poor connections, and locate high-resistance faults caused by corrosion, damaged wiring, or component degradation.
• 10A Solid-State Circuit Breaker - The integrated 10-amp solid-state circuit breaker provides protection while supporting higher-load component testing. It allows technicians to power demanding loads with added confidence and automatic reset protection.
• Built-In Electronic Latch Function - Apply continuous power or ground without holding the actuator switch. This is especially useful for extended component activation, dynamic troubleshooting, and hands free testing.
• Quick-Connect Ground Lead - The ground connection uses a 4mm banana jack for improved flexibility and reliability. It allows the use of extensions, adapters, and test leads while maintaining a secure ground connection.

Three powerful diagnostic tools in one compact handheld unit! The Endeavour ET2300 combines a high-precision True RMS digital multimeter, 2 channel oscilloscope, and built-in signal generator, giving technicians and engineers everything they need to test, measure, and troubleshoot electrical and electronic systems faster and more efficiently. Designed for field service, automotive diagnostics, industrial maintenance, and electronics repair, the ET2300 eliminates the need to carry multiple instruments without compromising performance. CAT III 1000V and CAT IV 600V safety rating.

Featuring a bright 3.5-inch colour display, high-resolution measurement capability, and advanced waveform analysis functions, the ET2300 provides clear, accurate results whether you're diagnosing sensors, testing circuits, analysing signals, or verifying repairs. The integrated signal generator allows users to inject test signals directly into circuits, making fault-finding quicker and more effective. With its rugged portable design, rechargeable battery, and professional-grade functionality, the ET2300 is the ideal all-in-one tool for modern diagnostic work.

• 25,000 count true RMS multimeter
• 2 ch oscilloscope - 50mHz bandwidth / 280MSa/S sampling rate.
• Signal generator supporting 6 common waveforms
• CAT III 1000V and CAT IV 600V safety rating
• Rechargeable (Type C). Plus extensive premium lead set.

Updated version with 'sharp tip' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Sharp tip
• 185mm overall length

Disconnect electrical connectors quickly, safely, and without damage with the Endeavour ET7070 Electrical Disconnect Pliers. Designed specifically for modern automotive electrical systems, these specialist pliers make it easy to release stubborn connector locking tabs and separate wiring harness connectors that can be difficult to access by hand. The updated serrated jaw design provides positive engagement with connector locks, allowing connectors to be released cleanly and efficiently.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip to better grip connectors
• 215mm overall length

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

The ET8040 disconnect kit is designed to assist with releasing electronic connectors on Knorr Bremse EBS modules. This kit comprises 3 tools for separating 2, 4, 6 & 12 pole electrical connectors on the trailer module, as well as a tool for loosening the bayonet nut on the power supply connection.

• Ideal for tight working areas on HGV trailers
• Manufactured from steel with vinyl dipped handles for improved comfort / grip

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

An essential set of terminal release tools for cleaning / replacing / removing terminals from the plastic connectors on most wiring connectors without damaging them.

• 23 pce kit
• Please see download link for information on individual disconect tools
• Soft grip handles with number identification