A specialised kit for injector removal on Sprinter, C Class / E Class. Extractor key for inner part of Bosch injectors included.
This kit allows for the removal of injectors without the need to use a slide hammer, and without removing the cam cover / damaging the cylinder head.
- 29mm diesel injector window socket
- 10mm hex extractor key
- Support shaft bearing assembly
Use the 29mm window socket to remove the nozzle head from the injector. Then use the 10mm key to remove the insert from the injector.
Place the support shaft bearing assembly over the injector. Make sure that the wide shoulders of the shaft support the tool. With a 10mm spanner, screw the shaft down onto the injector. Then using a 24mm spanner, in an anti-clockwise motion, draw the injector out of the cylinder head.
| SKU | ET1302 |
| Barcode # | 9321280338890 |
| Brand | Automotive |
| Product weight | 1.0700kg |
| Shipping weight | 1.070000kg |
| Vehicle Make | Mercedes |
12 Months
Others also bought
Injector Seal Removal / Installation Tool
Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.
This tool is designed to easily remove / install copper washers in deep seated injectors.
To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.
- 7mm ID | 230mm reach
- For deep seated injector seals
Digital LED Circuit Tester Kit
Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.
Wire piercer / probes / alligator clip included.
- Not for use with airbags / vehicle computers.
- For use with DC voltage only.
More from this category
VW EA211 Injector Removal Kit 3 & 4 Cyl
A master injector removal kit for both 3 cylinder and 4 cylinder EA 211 engines. This kit is essential for the removal of the injectors, as well as for the assembly of the combustion chamber seal on the injector.
This kit also includes an injector brush tool to ensure clean and reliable seating of fuel injectors (for engines using direct fuel injection systems).
- Applications: 1.5L 4V EA 211 EVO turbo charger
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
BMW Injector Removal Master Kit
A specialised kit for removing seized diesel injectors from VAG TDI engines, along with BMW N47 | N57 engines. The removers have a special two jaw design to fix the injector and pull out with a sllide hammer.
- Engine codes: BMW N47 | N57, VAG ALH | ALU | 1Z
- OEM Equiv: T10055 | T10402 | T10415 | T10163 | T40055
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).