Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids
• Auto shut off function.

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• EC5 connector for lithium jump packs
• For 12V systems only

Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

Time saving tool for testing electronic components actuated by a magnetic field. Positive / negative sensor. Batteries included.

Test devices like ignition coil, AC generator, EGR valve controller, relay & hall effect sensors etc.

• 2x AA Batteries included.