The Groz Flashlight is a high-quality, pocket-sized flashlight designed for professional users. It features a transport lock feature that prevents accidental switching on, saving battery power and preventing wastage. The light can be switched off and locked before keeping it in the pocket. The user can activate 'Lock Out' mode by pressing and holding the light switch until the light blinks twice. This is a very useful feature when carrying the light in a pocket.

The built-in memory function enables the light to start at the same intensity as when it was switched off, providing a convenient and seamless user experience. Manufactured from corrosion- resistant aluminium this robust pocket flashlight features a pocket clip for convenient and safe portability and an integrated hook for hanging the light.

Powered by a 3.7V 1800mAh Lithium-ion battery that can be charged using a standard USB cable, the light delivers a maximum of 500 Lumens of output.

• 500 Lumen light output
• 70 degree beam angle
• 3.7V 1,800 mAh Li-Ion battery

A short series single hex oxygen sensor socket for the removal / installation of Oxygen / Lambda sensors. Designed with a slot in the side to allow it to be fitted over the wiring harness.

• Applications: Jeep Grand Cherokee 3.0L V6 diesel (from 2014) | Dodge RAM 1500 3.0L V6 Diesel (from 2014)
• Overall length - 70mm
• 24 mm diameter | 6Pt
• 1/2" Sq Drv (or can also be driven with a 30mm wrench

These short series taps are designed to restore exhaust sensor port threads before installing new NOx sensors.

• Applications include: Ford EcoBlue | Mercedes
• M20 x 1.5 | M22 x 1.5 threads
• 48mm overall length
• Made from Titanium coated Chrome Moly
• Use with axle grease to catch any removed metal in the threads.

Cut out in socket allows the wires to the sensors to be bypassed. Wire range of applications including Holden, Mitsubishi, Nissan and VAG vehicles.

• 7/8" (22mm) dia | 7mm slot
• 80mm OL
• 3/8" Sq Drv

This thread chaser is designed to clean and repair damaged oxygen sensor port threads.

This thread chaser can also be used on 18mm spark plugs. Always use ANTI-SEIZE.

• M18 x 1.50 thread
• Use with 21mm socket

Specialised socket with slot that allows the sensor wires to be bypassed. Applications include Holden, Mitsubishi, Nissan and VAG group vehicles.

For heated and non heated Lambda sensors.

• 22mm dia
• 90mm overall length
• 3/8" Sq Drv

A short series single hex oxygen sensor socket for the removal / installation of Oxygen / Lambda sensors. Designed with a slot in the side to allow it to be fitted over the wiring harness.

• Applications: Jeep Grand Cherokee 3.0L V6 diesel (from 2014) | Dodge RAM 1500 3.0L V6 Diesel (from 2014)
• Overall length - 70mm
• 24 mm diameter | 6Pt
• 1/2" Sq Drv (or can also be driven with a 30mm wrench

A specialised Lambda socket for shrouded sensors on Ford Fiesta 1.2L (08 - 16). Thin wall design / cut out slot allow access to the sensor which is otherwise difficult to access due to the tight fitting heat shield.

• Thin wall
• 22mm x 119mm
• 1/2" Sq Drv