When you need a professional, durable, dependable sprayer. Made in Europe quality...

This unit is ideal for use with brake cleaner / tyre shine (petroleum based only - for silicon refer 124EP15) / diesel / kerosene / Prepsol / Turpentine.

• Viton seals / PA plastic, resistant to most hydrocarbon based solvents
• Viewing stripe with graduated scale
• Innovative pressure release button
• Protective cap to protect the one way return valve
• Stable base
• Large 1.5L tank
• Replacement seal kits available
• Brake Cleaner* excluding CRC Brakleen (due to acetone)
• Tyre shine

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Alkaline Cleaners
• Degreaser
• Anti Splatter chemicals
• Methylated Spirits (Denatured Alcohol)
• Comes with 1.5L container

A specialised tool for the removal of ball joints on most passenger vehicles. Ideal for compact work areas, or for vehicles where the control arm does not permit the use of fork type spreaders. Made from highly durable drop forged steel.

• Fork opening: 19mm
• Jaw capacity: 15 - 48mm
• Reach: 38mm
• Overall length: 135mm

This tool is designed to remove ball joints from vehicles. Insert between the ball joint and main body. Hammer the tool to loosen or remove the tie rod.

• 17mm opening
• 200mm overall length

This ball joint separator is designed for splitting anti-roll bar mountings, ball joints and track-rod ends in areas with tight spaces, especially on vehicles such as BMW, Ford, Mercedes Benz, Mitsubishi, VAG group etc.

This ball joint separator is designed with a replaceable sleeve which can be purchased separately.

• 21mm

This ball joint separator is designed for splitting anti-roll bar mountings, ball joints and track-rod ends in areas with tight spaces, especially on vehicles such as BMW, Ford, Mercedes Benz, Mitsubishi, VAG group etc.

This ball joint separator is designed with a replaceable sleeve which can be purchased separately.

• 24mm

• Applications: BMW E46, Mercedes W168 | W211 | W220

Used on most vehicles to remove the ball joint from the steering knuckle. Constructed of drop forged steel for lasting durability.

Use with hammer to separate parts with ease.

• Opening: 15/16" (24mm)
• 300mm length