Oxygen Sensor Socket | Thin Wall

Ford Fiesta
SKU: ET0802

Automotive


A specialised Lambda socket for shrouded sensors on Ford Fiesta 1.2L (08 - 16). Thin wall design / cut out slot allow access to the sensor which is otherwise difficult to access due to the tight fitting heat shield.

  • Thin wall
  • 22mm x 119mm
  • 1/2" Sq Drv

SKU ET0802
Barcode # 9321280378452
Brand Automotive
Product weight 0.2750kg
Shipping weight 0.275000kg

12 Months


More from this category


Promo
NOX Sensor Tap Set

NOX Sensor Tap Set

These short series taps are designed to restore exhaust sensor port threads before installing new NOx sensors.

  • Applications include: Ford EcoBlue | Mercedes
  • M20 x 1.5 | M22 x 1.5 threads
  • 48mm overall length
  • Made from Titanium coated Chrome Moly
  • Use with axle grease to catch any removed metal in the threads.

O2 / Vacuum Switch Socket

O2 / Vacuum Switch Socket

Cut out in socket allows the wires to the sensors to be bypassed. Wire range of applications including Holden, Mitsubishi, Nissan and VAG vehicles.

  • 7/8" (22mm) dia | 7mm slot
  • 80mm OL
  • 3/8" Sq Drv

Oxygen Sensor Port Thread Chaser

Oxygen Sensor Port Thread Chaser

This thread chaser is designed to clean and repair damaged oxygen sensor port threads.

This thread chaser can also be used on 12mm spark plugs. Always use ANTI-SEIZE.

  • M12 x 1.25 thread

Oxygen Sensor Port Thread Chaser

Oxygen Sensor Port Thread Chaser

This thread chaser is designed to clean and repair damaged oxygen sensor port threads.

This thread chaser can also be used on 18mm spark plugs. Always use ANTI-SEIZE.

  • M18 x 1.50 thread
  • Use with 21mm socket

Oxygen Sensor Socket | 22mm

Oxygen Sensor Socket | 22mm

Specialised socket with slot that allows the sensor wires to be bypassed. Applications include Holden, Mitsubishi, Nissan and VAG group vehicles.

For heated and non heated Lambda sensors.

  • 22mm dia
  • 90mm overall length
  • 3/8" Sq Drv

Oxygen Sensor Sockets & Thread Chaser Set

Oxygen Sensor Sockets & Thread Chaser Set

Suitable for oxygen sensors found on most modern vehicles. The sockets have cut-outs and slots to enable the sockets to be fitted over the wiring harness. Includes two chasers for cleaning and repairing damaged threads.

  • Thread chasers: M12 x 1.25 | M18 x 1.50
  • Oxygen sensor sockets: Straight 1/2" Drv x 78mm L x 22mm | Offset 3/8" Drv x 31mm H x 22mm | 1/2" Drv x 50mm H x 22mm