Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel. Zero degree offset.

Contains six metric size wrenches.

• 8x10
• 12x14
• 13x15
• 16x18
• 17x19
• 22x24

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

• Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 105 - 130mm

Phoenix System reverse brake bleeders are designed to push fluid up through the brake / clutch system. Essential for concentric clutch bleeding.

A great value entry level reverse brake bleeder.

• Simple, 1 man operation.
• Also able to pressure bleed.
• Tested for ABS Systems.

Super sensitive stethoscope kit to quickly identify sources of noise, harshness or vibration.

Especially well suited for road testing / diagnosing simultaneously.

• 6 channel selector unit, with 6 pick up sensors
• Extra long cords
• Cushioned headphones

A specialised kit for setting the balance shafts on common BMW (4 & 6 cylinder) | Mini | Citroen | Peugeot petrol engine vehicles.

• Engine codes: N42 | N45 | N46 | N46T | N52
• Engine codes: BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54), PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS), Mini 1.4 / 1.6 (N12 / N14)

This kit is designed to service balance shaft on Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain) when the balance shafts have been disturbed.

Also suits BMW vehicles.

• Engine codes: N40 | N42 | N45 | N46 | N46T
• OEM Equiv: 11 4 360 | 115 140 | 11 9 280 | 11 9 330

For locking intake & exhaust camshaft at TDC plus crankshaft in position for removal of crank bolt. To adjust the camshaft timing, the cam chain tensioner must be removed & adjuster centre bolts loosened to allow the crankshaft & 2 cams to be turned independently of each other so timing can be set.

ALSO suitable for Peugeot 207, 308 & Citroen C4 with EP6 DT / DTS coded engines.

• Engine codes: BMW Mini N14 (R55 | R56) | PSA EP6DT / EP6DTS

Includes locking pins for conventional diesels and later 2.8 JTD / HDi variants. Locking block slides onto tensioner to hold back belt. Includes a tensioner retaining tool to retain the tension plunger in a retracted position during the belt change.

A specialised timing kit for 2.0L & 2.2L twin cam diesel engines (DW10 | DW12) on Fiat / PSA vehicles. The twin cam system has one camshaft driven by a chain in the head, and the other by the cam belt.

• Engine codes: DW10 | DW12 | RHV | RHW | RHZ

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277