A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.

This kit is designed to be used with a bridge, and injector pullers. These are available separately.

• M14 x 1.5 pitch Pulling Spindle 240mm long.
• M14 x 1.5 pitch Pulling Spindle 315mm long.
• M17 x 1.0 pitch Pulling Spindle 240mm long.
• M17 x 1.0 pitch Pulling Spindle 315mm long.
• M18 x 1.5 pitch Pulling Spindle 315mm long.
• M25 x 1.0 pitch Pulling Spindle 240mm long.

A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.

The special extraction bridge and pull spindle allows for quick / safe injector removal.

To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.

• Engine codes: M47TU | M57 | M57TU
• Spindle 16 (one side M17) for mounting in the injector
• 29mm socket for disassembling the electric unit
• Internal 6 Pt wrench for removing the injector needle

A specialised kit for removing seized diesel injectors from VAG TDI engines, along with BMW N47 | N57 engines. The removers have a special two jaw design to fix the injector and pull out with a sllide hammer.

• Engine codes: BMW N47 | N57, VAG ALH | ALU | 1Z
• OEM Equiv: T10055 | T10402 | T10415 | T10163 | T40055

A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.

• Application: BMW 3.0L (2008 - 2016)
• Engine: N55 (from July 2013 onwards) - up to engine # 14407684
• OEM equiv: 130270 (13 0 270)

Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.

• Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
• Slide hammer thread: M12 | 175mm length (without adaptors).

Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.

This tool locks the diesel fuel pump allowing belt service on Renault 1.9L DTi engines.

• Applications: Clio, Megane, Laguna, Kangoo 1.9 DTi engines
• Engine codes: F9Q 717/731/780
• OEM Equiv: MOT 1200-01

A comprehensive kit for the removal of Bosch | Delphi | Denso | Siemens injectors. The set includes keys, deep open profile sockets, and adaptors for attaching to the supplied slide hammer. The compact slide hammer is ideal for use in tight spaces.

• Injector pullers: Bosch (17mmx1.0) | Delphi (14mmx1.5) | Denso (20mmx1.0) | Siemens (27mmx1.0)
• Injector nozzle sockets (100mm): 25, 27, 29, 30mm
• Slide hammer (M16 x 1.5 thread)

A specialised adaptor for Denso injectors.

• M20 x 1.0 external thread

This is a specialised set for removing wheel lock nuts.

The set includes eight different sized conical dismantling sockets. Select the appropriate size socket, and then hammer onto the locking wheel nut. Then drive / remove with a breaker bar / power bar (ET8169A).

Once the wheel nut has been removed use the removal punch to separate the socket from the wheel nut.

Less likely to damage the wheel nut compared to other more aggressive types of wheel nut extractors.

• Impact grade (Chrome Moly steel)
• Inner dia: 18.5 - 15.6mm | 19.5 - 17.6mm | 20.4 - 18.5mm | 21.6 - 19.7mm | 22.5 - 20.6mm | 23.6 - 21.7mm | 25.5 - 23.6mm