Keep your Air Boy Soda Blaster running at peak performance with this high quality replacement soda blasting media. Made from pure baking soda, it features a precisely controlled particle size engineered specifically for soda blasting, ensuring smooth flow, consistent pressure, and reliable cleaning power.

Perfect for removing paint, carbon, grease, and light rust, this media delivers effective, non abrasive cleaning while remaining gentle on sensitive surfaces.

Whether you're tackling automotive restoration, machinery cleaning, or general workshop tasks, this soda media keeps your blaster performing at its best.

• Supplied in a Convenient 5kg Container
  - Provides ample blasting media for multiple jobs while ensuring easy storage, handling, and transport.
• Mandatory Use of P2 Respiratory Protection - always wear P2 rated respiratory protection to safeguard against fine airborne particles during use, ensuring safe operation in workshop and on site environments.
• Water Soluble Sodium Bicarbonate for Easy Cleanup
  - This media dissolves completely in water, making post-blasting cleanup simple, fast, and environmentally responsible.
  Avoid Inhaling the dust.

Soda blasting delivers a fast, powerful, and non abrasive way to remove paint, carbon buildup, surface rust, and more - making it an ideal choice for anyone who wants professional quality results without the risk of damage. Unlike harsher blasting methods, soda media won’t heat or distort sheet metal and is gentle enough to clean around glass, rubber, and plastic with confidence. Bicarbonate soda media is eco friendly, clean to use, and safe, making it perfect for workshops, restorers, and DIY users alike. As with any blasting process, airborne dust can be harmful if inhaled, so always use P2 respirator protection, along with suitable eye, face, and hearing protection.

The Air Boy soda blaster is designed for small jobs, and features a specially designed nozzle that does not require adjustment. For optimal performance, pair this kit with an air compressor rated at 180 L/min or higher, and install a water trap to ensure smooth, uninterrupted media flow. Replacement soda media (124320100) is readily available, so you can keep blasting without downtime.

• Precision Engineered Nozzle for Consistent Results - delivers an accurate, controlled blasting stream with no manual adjustments needed, ensuring smooth operation and professional quality finishes every time.
• Optional Wide Pattern Nozzles for High Speed Coverage
  - Compatible with wider nozzles (sold separately), allowing users to increase surface coverage and reduce blasting time—perfect for larger jobs or workshop efficiency.
• Mandatory Use of P2 Respiratory Protection - always wear P2 rated respiratory protection to safeguard against fine airborne particles during use, ensuring safe operation in workshop and on site environments.
• Supplied with 1kg of bonus sodablasting media to get you started. Use with a 180L / min or higher air compressor for optimal results.

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female inlet
• Clip On connector
• Sealing type chuck

Replacement chuck head assembly for the Sonsbeek 3103000 driveway tyre inflator.

A head repair kit for the Sonsbeek 3103000 tyre inflator.

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Large bore chucks are designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Sealing type

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Large bore head is designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Non sealing type

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 10" long
• 1/4" BSP female connector
• Straight chuck to get deeper into the wheel