Sonsbeek Driveway Tyre Inflator

Hose Assembly
SKU: 3103000-RHA

Hose Assembly


SKU 3103000-RHA
Barcode # 9321280336162
Brand Sonsbeek

12 Months


You may also like


Sonsbeek Driveway Tyre Inflator

Driveway Tyre Inflator

Supply Pressure: Maximum 13.8 BAR, Minimum 6.9 BAR, Recommended clean filtered air

Body Construction: Die cast aluminium with steel operating lever and impact absorbing bumper

Pressure Range: 0-9.6 BAR (0-138lbf/in2) standard

Gauge: Linear with magnifying window

  • Inlet size: 1/4" BSP
  • Measurement range: 0 - 138 PSI


More from this category


Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

  • 1/4" BSP female inlet
  • Clip On chuck
  • Non sealing type

Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 1/4" BSP female inlet
  • Clip On connector
  • Sealing type chuck

Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Sonsbeek Clip On Chuck Sonsbeek Clip On Chuck

Clip On Chuck

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

  • 6mm hose tail
  • Clip on chuck
  • Sealing type