This kit is ideal for use on earlier PSA engines to lock the engine pulley or as a top up kit for lost pins. Use with the ET1625 valve spring compressor to set correct cam belt tension.
|Vehicle Make||Model||Series||Engine Code||Engine Size||Year Start||Year End|
More from this category
For locking intake & exhaust camshaft at TDC plus crankshaft in position for removal of crank bolt. To adjust the camshaft timing, the cam chain tensioner must be removed & adjuster centre bolts loosened to allow the crankshaft & 2 cams to be turned independently of each other so timing can be set.
ALSO suitable for Peugeot 207, 308 & Citroen C4 with EP6 DT / DTS coded engines.
- Engine codes: BMW Mini N14 (R55 | R56) | PSA EP6DT / EP6DTS
Includes locking pins for conventional diesels and later 2.8 JTD / HDi variants. Locking block slides onto tensioner to hold back belt. Includes a tensioner retaining tool to retain the tension plunger in a retracted position during the belt change.
This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.
It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.
- OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277