The Air Boy 124140112 Blow Gun is a high-performance compressed air tool designed for cleaning, drying, and blow-off applications. Featuring a straight 300mm pipe, this blow gun provides extended reach, making it ideal for hard-to-access areas in workshops, garages, and industrial settings.

Built with impact-resistant acetal plastic, the ergonomic handle and large trigger ensure precise airflow control for efficient operation. With a maximum working pressure of 16 bar, this blow gun delivers powerful air output while maintaining low noise levels for user comfort.

Made in Denmark quality. Lifetime guarantee on the valve mechanism.

• Pipe length: 300mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

A specialised kit for setting the balance shafts on common BMW (4 & 6 cylinder) | Mini | Citroen | Peugeot petrol engine vehicles.

• Engine codes: N42 | N45 | N46 | N46T | N52
• Engine codes: BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54), PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS), Mini 1.4 / 1.6 (N12 / N14)

This kit is designed to service balance shaft on Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain) when the balance shafts have been disturbed.

Also suits BMW vehicles.

• Engine codes: N40 | N42 | N45 | N46 | N46T
• OEM Equiv: 11 4 360 | 115 140 | 11 9 280 | 11 9 330

For locking intake & exhaust camshaft at TDC plus crankshaft in position for removal of crank bolt. To adjust the camshaft timing, the cam chain tensioner must be removed & adjuster centre bolts loosened to allow the crankshaft & 2 cams to be turned independently of each other so timing can be set.

ALSO suitable for Peugeot 207, 308 & Citroen C4 with EP6 DT / DTS coded engines.

• Engine codes: BMW Mini N14 (R55 | R56) | PSA EP6DT / EP6DTS

Includes locking pins for conventional diesels and later 2.8 JTD / HDi variants. Locking block slides onto tensioner to hold back belt. Includes a tensioner retaining tool to retain the tension plunger in a retracted position during the belt change.

A specialised timing kit for 2.0L & 2.2L twin cam diesel engines (DW10 | DW12) on Fiat / PSA vehicles. The twin cam system has one camshaft driven by a chain in the head, and the other by the cam belt.

• Engine codes: DW10 | DW12 | RHV | RHW | RHZ

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277