Designed to remove the fuel injector without disturbing the calibration plate. Fuel injectors on the 5.2L 4HK1 engine have a calibration plate that must not be removed during service.

• Engine codes: 4HK1 | 6HK1
• OEM equiv:EN-46720 (5-8840-2826-0)

A specialised tool for quickly / safely installing rear oil seals on Isuzu trucks with 4JJ1 engines. An essential tool to avoid damaging oil seals during installation.

This tool is designed to suit a wide range of late model Isuzu vehicles with 4JJ1 engines. For earlier model vehicles, refer ET1261A.

• Genuine oil seals: 8-97071-561-1 | BZ4962E
• Applications: 3.5T 4JB1 | 4JG2 | 4JH1 | 4JJ1 130HP / 150HP
• Chassis: NKR69 (4JG2) (94-) | NKR77 (4JH1-TC (02-) | NLR85 (4JJ1-TCS) (08-) | NNR85 (4JJ1-TCS) (08-)

A time saving tool to quickly / safely replace crankshaft oil seals on Isuzu 4 & 6 tonne truck engines.

• Engine codes: 4HE1 | 4HF1 | 4HG1 | 6HE1 | 6HH1 | 6HK1
• OEM seals:Front BZ4219E (10950.285) | BZ4219F, Rear BZ4365E (10950.286)

A specialised oil seal removal tool for Isuzu 4J series engines.

The tool reaches around the rear wear sleeve, and locates on the back edge of the sleeve, in order to pull the sleeve from the camshaft. Once positioned, bolt the puller to the puller disc, to secure the legs for easy removal of the sleeve.

• Engine codes: 4JB1 | 4JJ1 (RT50) | 4JB1 | 4JG1 | 4JG2 | 4JH1 | RF10 (4JK1)
• Application: Isuzu ELF 3.5 Tons
• OEM equiv: 5-8840-2360-0

A specialised socket to drive / hold the jam nut on the valve clearance adjuster, while allowing another wrench to pass through the socket to adjust the valve clearance.

This socket is essential as due to the recessed nature of the jam nut, normal wrenches are not able to reach it.

• Applications: Isuzu 3.5T | RT50 | RF10
• Engine codes: 4JB1 | 4JG2 | 4JH1 | 4JJ1
• 12mm diameter | 105mm OL
• 17mm hex drive