Designed to remove the fuel injector without disturbing the calibration plate. Fuel injectors on the 5.2L 4HK1 engine have a calibration plate that must not be removed during service.
- Engine codes: 4HK1 | 6HK1
- OEM equiv:EN-46720 (5-8840-2826-0)
Engine Code(s)
4HK1, 6HK1
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Isuzu | Elf | NPR | 4HK1 | 5.2L | 1999 | 2002 |
| Isuzu | Forward | FTR | 4HK1 | 5.2L | 2010 | |
| Isuzu | NPR350 | NPR | 4HK1 | 5.2L | 2005 | 2008 |
| Isuzu | NPR450 | NPR | 4HK1 | 5.2L | 2005 | 2008 |
| Mazda | Titan | LPR75 | 4HK1 | 5.2L | 2009 | |
| Nissan | Atlas | APR75 | 4HK1 | 5.2L | 2007 | |
| Isuzu | NPS250 | NPS | 4HK1-TCN | 5.2L | 2005 | 2015 |
| Isuzu | NPS300 | NPS | 4HK1-TCN | 5.2L | 2005 | 2015 |
| Isuzu | NPS400 | NPS | 4HK1-TCN | 5.2L | 2005 | 2009 |
| Isuzu | NQR450 | NQR | 4HK1-TCS | 5.2L | 2005 | 2007 |
| Isuzu | NQR500 | NQR | 4HK1-TCS | 5.2L | 2005 | 2007 |
| Isuzu | Forward | FTR | 6HK1 | 7.8L | 2000 | |
| Isuzu | Forward | FVZ | 6HK1 | 7.8L | 2001 | |
| Isuzu | Forward | FRR | 6HK1 | 7.8L | 2003 | 2006 |
| Isuzu | Forward | FSR | 6HK1 | 7.8L | 2005 |
EN-46720
| SKU | ET6188A |
| Barcode # | 9321280427921 |
| Brand | Automotive |
| Product weight | 1.1000kg |
| Shipping weight | 1.100000kg |
| Vehicle Make | Isuzu |
12 Months
More from this category
CAT C15 Front / Rear Crankshaft Seal Installer
A specialised front / rear crankshaft seal wear sleeve installer kit. Designed for quick / safe servicing of oil seals.
- Applications: C15 / C16: 3406 | 3406B | 3406C | 3406E | 3408
- OEM equiv: 5P-1733 | 5P-1737 (3) | 6V-6142 | 6V-6143 | 9S-8858
- Oil seals: 142-5867 | 142-5868 | 2W1734 | 319-0785 | 336012
Fuso / Iveco Crankshaft Front Oil Seal Tool
Also timing cover centering.
- Engines: Iveco F1C Fuse Lift cars (Euro 5)
- Application: Daily
- OEM Equiv: Iveco 99346258 Fuso MH063962
Fuso / Iveco Injector Removal Tool
A specialised tool for removing the injectors on a range of Fuso / Iveco and Mitsubishi Canters. This tool suits injectors with a 12.5mm inside diameter thread size for the fuel feed line.
- Applications: Fuso Euro 5 | Iveco Daily F1C (Euro 5) | Mitsubishi Canter 4P10
Fuso 380 Oil Mist Separator Wrench
A special wrench designed for removing / installing the oil mist separator on Fuso 380 trucks (over 17 ton). Also suits buses, including Mitsubishi Canter Eco4 (3.5 | 6.7 | 9 ton).
- Applications: Fuso 380 (engine code 6M70)
- Oil filter number: A66-GF30
- 109mm diameter
- 8 ribs
- 1/2" Sq Drv
Fuso 4D33 Rear Crankshaft Oil Seal Tool
A specialised crankshaft rear oil seal installation tool. This tool is essential for safely installing the rear oil seal. Part of the Endeavour Tools range of oil seal installation tools.
- Application: Mitsubishi Fuso Canter | Rosa
- Engine codes: 4D33 | 4D34
- Suits genuine oil seal: BZ4603E
Fuso Rear Crankshaft Oil Seal Tool | 4D34
Specialised rear crankshaft oil seal removal tool for a wide range of popular Fuso engines.