A specialised tool for removing the injectors on a range of Fuso / Iveco and Mitsubishi Canters. This tool suits injectors with a 12.5mm inside diameter thread size for the fuel feed line.
- Applications: Fuso Euro 5 | Iveco Daily F1C (Euro 5) | Mitsubishi Canter 4P10
Engine Code(s)
4P10
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Fuso | Canter | FBA20 | 4P10 | 3.0L | 2010 | |
| Fuso | Canter | FBA00 | 4P10 | 3.0L | 2010 | 2017 |
| Fuso | Canter | FDA20 | 4P10 | 3.0L | 2010 | 2015 |
| Fuso | Canter | FE855 | 4P10 | 3.0L | 2010 | 2012 |
| Fuso | Canter | FBA60 | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEA50 | 4P10 | 3.0L | 2011 | 2020 |
| Fuso | Canter | FEB50 | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FBA30 | 4P10 | 3.0L | 2011 | 2020 |
| Fuso | Canter | FGB70 | 4P10 | 3.0L | 2011 | 2020 |
| Fuso | Canter | FEB80 | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FBA50 | 4P10 | 3.0L | 2011 | 2020 |
| Fuso | Canter | FEA20 | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEB90 | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEA53 | 4P10 | 3.0L | 2011 | 2013 |
| Fuso | Canter | FEB70 | 4P10 | 3.0L | 2011 | 2012 |
| Fuso | Canter | FEA21C | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEA21E | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEB21C | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEB21E | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEB51E | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEB71E | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEB71G | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEC71E | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FEC81C | 4P10 | 3.0L | 2011 | |
| Fuso | Canter | FGB71E | 4P10 | 3.0L | 2011 |
99342156
MH064377
| SKU | ET1003IV |
| Barcode # | 9321280427860 |
| Brand | Automotive |
| Product weight | 0.9500kg |
| Shipping weight | 0.950000kg |
| Vehicle Make | Fuso |
| Vehicle Make | Iveco |
| Vehicle Make | Mitsubishi |
12 Months
More from this category
CAT C15 Front / Rear Crankshaft Seal Installer
A specialised front / rear crankshaft seal wear sleeve installer kit. Designed for quick / safe servicing of oil seals.
- Applications: C15 / C16: 3406 | 3406B | 3406C | 3406E | 3408
- OEM equiv: 5P-1733 | 5P-1737 (3) | 6V-6142 | 6V-6143 | 9S-8858
- Oil seals: 142-5867 | 142-5868 | 2W1734 | 319-0785 | 336012
Fuso / Iveco Crankshaft Front Oil Seal Tool
Also timing cover centering.
- Engines: Iveco F1C Fuse Lift cars (Euro 5)
- Application: Daily
- OEM Equiv: Iveco 99346258 Fuso MH063962
Fuso 380 Oil Mist Separator Wrench
A special wrench designed for removing / installing the oil mist separator on Fuso 380 trucks (over 17 ton). Also suits buses, including Mitsubishi Canter Eco4 (3.5 | 6.7 | 9 ton).
- Applications: Fuso 380 (engine code 6M70)
- Oil filter number: A66-GF30
- 109mm diameter
- 8 ribs
- 1/2" Sq Drv
Fuso 4D33 Rear Crankshaft Oil Seal Tool
A specialised crankshaft rear oil seal installation tool. This tool is essential for safely installing the rear oil seal. Part of the Endeavour Tools range of oil seal installation tools.
- Application: Mitsubishi Fuso Canter | Rosa
- Engine codes: 4D33 | 4D34
- Suits genuine oil seal: BZ4603E
Fuso Rear Crankshaft Oil Seal Tool | 4D34
Specialised rear crankshaft oil seal removal tool for a wide range of popular Fuso engines.
Fuso Rear Crankshaft Seal Tool
Specialised rear crankshaft oil seal removal tool for a wide range of popular Fuso engines.
- FUSO Canter / Rosa - 4D31 | 4D33 | 4D34 | 4M50 | 6D14 | 6D16 | 6D31 | 6D34 | 6D60 | 6M61 | 6M34 | 6M60 | GM60
- OEM Equiv M061470 | MH062677 (Slinger ME017-240)
- Oil seal: BZ4603B - 100mm x 124mm x 13.3mm